Jump to content
SAU Community

Recommended Posts

Hey all,

I read a topic slightly like this and would like some opinions.

I had my engine oil and spark plugs changed at my mates garage and when they did a general checkup, they found that my radiator reservoir and radiator were drained almost completely.

The mechanic who was inspecting the car said that he could feel oil in the radiator and said that it's a 90% chance that the head (not sure which head) is cracked.

I called the previous owner of the car and he said that it is VERY rare for a head to crack and that my mate is trying to make a quick buck. He says that it's more possible that the head gasket is gone.

I called up a mate who works for Autobarn to see what his opinion was and he said he suspects it could be the head gasket too but told me to call a shop nearby my house to see what they say.

I called up the workshop I got suggested to call and told them what my mates workshop told me and he said that there is a possibility that it could be the head also.

The head gasket was done 6 months ago (just before I bought the car).

I've been told that if the head is to be fixed, it would cost roughly $4k.

Just labour to pull apart the engine is already expensive. Is there a way the head can be re-built?

Would it be better to change the head or re-build the engine (if this includes a new or re-built head)?

Thanks in advanced for the opinions.

Danny

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/
Share on other sites

personally...if your head is crackd id never fix it and re-use it. it will just be prone to cracking again.

BUT, could just be ur head gasket, maybe when they put it on the first time they didnt do the job properly...?

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3350328
Share on other sites

yeha I doubt its cracked, but you're going to have to pull the head off anyway to see whats going on.

A Second hand R33 RB25 head is around the $500 mark, GTRS are about the $900 mark. Why bother spending $4k to fix one??

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3350342
Share on other sites

$4k is for the head and the labour to dis-assemble and re-assemble it.

So there is a possibility that the shop that did the head gasket didn't do a great job..? -_-"

Has anyone re-built their engine? I saw a thread earlier that someone re-built their engine for around $6k.

How much would a normal engine re-build cost? Does this cover the head part too or add $1k+ for a new head?

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3350945
Share on other sites

$4k is for the head and the labour to dis-assemble and re-assemble it.

So there is a possibility that the shop that did the head gasket didn't do a great job..? -_-"

Has anyone re-built their engine? I saw a thread earlier that someone re-built their engine for around $6k.

How much would a normal engine re-build cost? Does this cover the head part too or add $1k+ for a new head?

ive got a fully recon s2 r33 rb25 head for $550 if you want it ?

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3351068
Share on other sites

ive read countless threads on this forum alone where rb26dett's from r32gtrs have been rebuilt. the search button is your friend.

$4k is a fair price for the head to be pulled out fixed and refitted. This involves removing the whole motor and stripping pretty much the top half of the motor. A fair amount of work involved.

I had oil in my radiator. This was from a crack inside 1 of the oil galleries in my head. It was not repairable so i needed a new head. I ended up having the whole motor rebuilt with forged pistons and rings. I did this cos i intended on using the car on racetracks and wanted a bit more security. In total, i spent around $14k on my car. This was the motor, powerfc, clutch and a few extra goodies.

If its suspected that there is either a crack in the head or the head gasket, you need to pull it down to find out., Theres no sure fire way to tell until you do pull it down. If you do this, maybe look at what you want the car for. Do you wanna have a nice clean car for road only or do you wanna go to the other end of the scale and go flat out round racetracks every opportunity you have? Then look at what to do from there.

My 2c

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3351353
Share on other sites

On a more positive note!

Since the head gasket was replaced;

most likely due to it failing, oil will of most

likely found its way into the radiator and

shown a white milky substance under the

radiator cap / oil cap!

Now, when the gasket was changed the previous owner

may of not flushed out the radiator of oil residue.

As such, I personally would not make any decisions on rebuilding or

removing the head cylinder, until a compression test shows there

is a pressure drop between two adjacent cylinders.

If your head is cracked, the motor will, in general,

run fine up until the crack experiences enough heat to

expand and flow water/coolant into the oil gallery.

So basically you would of noticed frequent over-heating

and real bad engine performance. Is that so?

Cheers,

Bill

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3351505
Share on other sites

On a more positive note!

Since the head gasket was replaced;

most likely due to it failing, oil will of most

likely found its way into the radiator and

shown a white milky substance under the

radiator cap / oil cap!

Now, when the gasket was changed the previous owner

may of not flushed out the radiator of oil residue.

As such, I personally would not make any decisions on rebuilding or

removing the head cylinder, until a compression test shows there

is a pressure drop between two adjacent cylinders.

If your head is cracked, the motor will, in general,

run fine up until the crack experiences enough heat to

expand and flow water/coolant into the oil gallery.

So basically you would of noticed frequent over-heating

and real bad engine performance. Is that so?

Cheers,

Bill

Bill has made a good point here. Get your radiator flushed out several times. Oil is a bitch to remove from the cooling system. Talk to the previous owner and ask them why was the head gasket replaced. Was is because there was oil in the radiator? If they say yes, then most likely your motor hasn't been flushed enough to get rid of it all yet.

Some people like to change the head gasket so they can add a metal gasket to support bigger boost. Maybe thats why it was changed. If this is so, then quite possibily you could be looking at a cracked head.

Compression tests, leak down tests and any other funky tests that your mechanic can come up with will not always show up a crack in the head. My motor is a perfect example of this. Every test thinkable was done and everything was perfect. Car still drove like a dream. No loss of power at all. The only issue I had was I always needed to top up my oil and the radiator always needed flushing out to get rid of the oil.

Looking at your options 1st is the best thing to do. Rebuilds arn't cheap

Cheers, Ron

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3351737
Share on other sites

On a more positive note!

Since the head gasket was replaced;

most likely due to it failing, oil will of most

likely found its way into the radiator and

shown a white milky substance under the

radiator cap / oil cap!

Now, when the gasket was changed the previous owner

may of not flushed out the radiator of oil residue.

As such, I personally would not make any decisions on rebuilding or

removing the head cylinder, until a compression test shows there

is a pressure drop between two adjacent cylinders.

If your head is cracked, the motor will, in general,

run fine up until the crack experiences enough heat to

expand and flow water/coolant into the oil gallery.

So basically you would of noticed frequent over-heating

and real bad engine performance. Is that so?

Cheers,

Bill

With the car, stable operating temperature is 80ºC. Lately it's been up to 84ºC so I haven't really taken much notice. There is still plenty of power, no power loss...

Bill has made a good point here. Get your radiator flushed out several times. Oil is a bitch to remove from the cooling system. Talk to the previous owner and ask them why was the head gasket replaced. Was is because there was oil in the radiator? If they say yes, then most likely your motor hasn't been flushed enough to get rid of it all yet.

Some people like to change the head gasket so they can add a metal gasket to support bigger boost. Maybe thats why it was changed. If this is so, then quite possibily you could be looking at a cracked head.

Compression tests, leak down tests and any other funky tests that your mechanic can come up with will not always show up a crack in the head. My motor is a perfect example of this. Every test thinkable was done and everything was perfect. Car still drove like a dream. No loss of power at all. The only issue I had was I always needed to top up my oil and the radiator always needed flushing out to get rid of the oil.

Looking at your options 1st is the best thing to do. Rebuilds arn't cheap

Cheers, Ron

My dads mate had a look and said the engine might need a new head gasket soon and that they weren't cheap to have done (trying to talk me out of buying the car).

The old owner was willing to have the head gasket changed before I took ownership of the car.

Maybe I should take it back to the workshop that worked on the engine? They did the head gasket, maybe it was their screw up? (except I don't want them to work on it again to screw it up again.. -_-")

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3351919
Share on other sites

With the car, stable operating temperature is 80ºC. Lately it's been up to 84ºC so I haven't really taken much notice. There is still plenty of power, no power loss...

My dads mate had a look and said the engine might need a new head gasket soon and that they weren't cheap to have done (trying to talk me out of buying the car).

The old owner was willing to have the head gasket changed before I took ownership of the car.

Maybe I should take it back to the workshop that worked on the engine? They did the head gasket, maybe it was their screw up? (except I don't want them to work on it again to screw it up again.. -_-")

if they stuffed it up, they should fix it without charging you a cent, but because you were not the person that owned the car when it was changed, they might not fix it for free. Unless the previous owner is nice enough to take it back there and tell em that he still owns it? choice is yours

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3352795
Share on other sites

if they stuffed it up, they should fix it without charging you a cent, but because you were not the person that owned the car when it was changed, they might not fix it for free. Unless the previous owner is nice enough to take it back there and tell em that he still owns it? choice is yours

I got the receipt for the head gasket change.

If it is an invoice from them, they should be doing something about it.. right?

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3352957
Share on other sites

how do you know there is a problem here? if the engine is running correctly ?

I would be filling it back up again and checking it again. Maybe there is another reason why it lost water and there is still oil from the previous head gasket blow up.

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3353208
Share on other sites

just remember - The previous could have went for "one last boost" and cranked the boost up and gave the car a flogging before they gave it to you, blowing the head gasket.

There are many factors in this, and I'd just be getting the head off for now and seeing what is wrong.

Link to comment
https://www.sau.com.au/forums/topic/185068-head-crack/#findComment-3353358
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...