Jump to content
SAU Community

Recommended Posts

  • Replies 243
  • Created
  • Last Reply

Top Posters In This Topic

Entry fee is normally $70 and you usually get 5-6 runs for that. I just noticed that entry forms are not up yet for 30 Sept, but when they do, you can download and email them in, bringing original with you on day. Its also worth reading the Supp Regs.

If you don't register before Thursday, there is a $20 late fee and you may not get in if its full.

Sounds to me like you all enjoyed it so much that you are going to have to start coming down to the SDMA Hillclimb (which is next door) at the end of each month. Next one is on 30th Sept.

L2S licence required (many already have it and its ezy pezy to get) Entries need to be in by Thursday before and lately they have been full up, so get in earlier if you want to go.

HillclimbTrack.jpg

http://www.sdmahillclimb.com/

Hmmm Il be in for this~ Hopefully the 33 is ready in time!!

wow what a fantastic supply of r32s you guys have

that track looks great too... very fast in comparison to our long wang. were there many offs?

maybe next year some vics will come.

top pics also

From where Steve and I were standing - Yep!!

I was buggered from running up to you guys, and glad you guys were all good :D

thanks for running up so quick :P didn't realy get a chance to meet you...

dude it wasnt quick! I almost had a heart attack from running hahaha

yes, Im very unfit :P

all good mate!

Bullet - next texi - its onnnnn!!!!!!!!!! :D

Michelle - go the frangipani's!!

and unfort I cant make the hillclimb due to working on sundays :no:

ahh my car still looks soooo damnnnn sexy... even with the grafitti :P

but frangipanis??? :D

Are you coming to the hillclimb Mick? What tyres are ya running huh! huh!

I know they will be Federals, but are you going the 595RS's?

I won the wooden spoon....... :sorcerer:

stoopid patch of oil on the top of the hill..... :D altho the sliding action was kinda fun!!! (dunno if hubby would agree - I think he saw his life insurance flash before my eyes..... :O)

and whats with those cones jumping out in front of me????? :no: they obviously have a death wish.....!

Yeah that oil spill - i couldnt see it :P

Did you have fun?

thanks for running up so quick :) didn't realy get a chance to meet you...

Thats cool. We needed beers after that amount of exertion

Yeah that oil spill - i couldnt see it :(

Did you have fun?

I didn't see it either - I just felt it..... :P lol! Like I said - I think Wayne saw his life insurance flash before my eyes!!!

And yes - I had an AWESOME time, you did a great job organising it all :)

I didn't see it either - I just felt it..... :P lol! Like I said - I think Wayne saw his life insurance flash before my eyes!!!

And yes - I had an AWESOME time, you did a great job organising it all :)

Awww shucks :(

That comment reminds me of an everybody loves raymond ep where debra can recite the exact amount ray is insured for :P

I know a few of you claim an oil spill on that corner but I really don't think there was one. Chubb and myself personally inspected the whole area on foot. Stopping to touch anything that looked likely. IMO the cars come over the previous rise turning to the left then the road immediately goes to the right and is off camber. The cars simply don't have enough weight over their left side tyres to effectively make the next corner.

Either that or you all suck at driving. :(

Anyway, next time we will have another chiccane there so you can't be going fast enough to kill yourselves.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...