Jump to content
SAU Community

Recommended Posts

MEH!

My CD player won't eject a CD and i'm getting 'CD Err F0.' I reckon it's just cheaper to sort out a connection to my ipod. Is there an AUX at the back of the player or do I need to buy an adaptor, similar to the V35's.

Oh and I didn't realise VE SS did the 100 in only 5.5secs, dayyamm

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/product.php?ProductID=30&forceShowProduct=1

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/p...ceShowProduct=1

I use that same USA Spec set up. Awesome sound quality and VERY easy to fit and set up. Cost was under $150 delivered from the US. It also has a spare audio input if you want to hook something else to it and also charges the iPhone.

There are heaps of threads about "fixing" the CD error, have a search in here or in the V35 section.

For an iPod connection to the OEM head unit, the USA Spec PA15-NIS is what you'd be after for simple plug and play (although you will need to get behind the headunit)

http://usaspec.com/p...ceShowProduct=1

scchwweet, thanks for link.

I ordered mine here. Mine was a tad cheaper as the dollar was higher at the time

http://www.ebay.com.au/itm/USA-SPEC-PA15-NIS-CAR-STEREO-NISSAN-INFINITI-IPOD-AUDIO-ADAPTOR-NEW-/400268286077?pt=LH_DefaultDomain_0&hash=item5d31d9587d#ht_3202wt_1378

Edited by slippylotion

Hi All

Had a strange idling problem with my ARX - I was driving the car for good 2 hours then pulled over

strangely the car idles so low where it feels like its going to die. Any thoughts?

Also, can anyone PM me service details for each KMS ie: 10,000kms service and so fort

Thanks everyone

Cheers!!!!

So that will fit the non bose system? Does an installation manual come with it?

Yep fits the single DIN factory deck. Comes with instructions although its very easy to install. All you need to do is name the playlists on your iPhone with Nissan in them.

I run:

Nissan 1 - artists

Nissan 2 - albums

Nissan 3 - all songs

Nissan 4 - blank

Nissan 5 - blank

Nissan 6 - blank

You can set them how you like but you need to name them 1-6 with Nissan.

Nissan 5 allow direct iPhone control rather than control from the deck. If in 1-3 playlists you can jump song/albums/artist via the 1-6 buttons on the head unit.

Overall its a great unit to connect your iPhone/ipod.

Import monster/ streeter?

On another note, Im looking at wheels at the moment. Im not happy with the flap in the sidewall I currently have on one, especially considering I have a drive to Melbourne coming up. Not replacing tyres on the 17s, rather move to 18s.

Looking at either 350z track 18x8+30 or CE28S 18x8.5+30.

Ive seen pics of the 350z track fitment and it looks good. Ive also seen people with 19x8.5+22 and it looks good. Would i be right in thinking 18x8.5+30 will be a good fit?

Not sure if you remember how mine sit but they are 9+30 and I wouldn't go any lesser than that. I think a 8.5+30 will sit in the guard too far.

I'm running +37 by 8.5 and they don't stick in to far.....you can always run some spacers if you want more track!

No the 8.5 will sit out another 6mm and in another 6mm. To fill the guards I would go either a 9+30 or 8.5+22 or if you want them Out the guard a little go for 9+25. These sizes keep good clearance inside to the suspension arm.

PM me your number and I'll send you a pic of how mine sit, can't upload on here as I accidentally killed my MacBook yesterday ?

Edited by slippylotion

Well the 350Z Track wheels look ok, based on the pics Ironpaw has posted:

001-Copy.jpg

002-Copy.jpg

003-Copy.jpg

004-Copy.jpg

005-Copy.jpg

So if the 8.5 is going to give me another 6mm that sounds fine. I don't need to fill the guards right up, and I don't really want them out the guards.

Just wanted to make sure they'd clear, and try and get an idea of how the 18x8.5+30 would look compared to the 350Z 18x8+30, because I knew there were pics online of the 350Z wheels. Might give the guy a call and try and drop round and test fit on the weekend.

Cheers for the help, PM sent.

All depends on how much low you have.

The moar low, the bigger offset you can tuck in- to a point. If you dropped Ironpaws car 1 inch all round, the wheels would be tucked in and IMO wouldn't look great.

Just type in "wheel offset calculator" into Google, and that will tell you how much it will change by. Stock is 17x7 +45. Go from there. We have seen up to 18x9.5 +30... or maybe even a tougher offset on M35s.

All depends on how much low you have.

The moar low, the bigger offset you can tuck in- to a point. If you dropped Ironpaws car 1 inch all round, the wheels would be tucked in and IMO wouldn't look great.

Yep, your car is pretty damn low from memory Ryan! I'd be thinking you'll need 10mm spacers at a minimum to make them look even remotely close to "fitment".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...