Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

I just looked at the torque figure - holy farken shit

You're making 670nm at 230rwkw at the same RPM as me.

I'm making 702nm at 300rwkw at the same RPm...

so at 300rwkw you'll make probably 150nm+ more!

going to be a f**ken monster. Goodbye tyres! ahaha

Was devastated we didn't get to wind it up... can't wait to finish it off :)

RPM Scale - This is a guide only and was done as an rpm vs road speed from the tacho.

Tuning was by no means finished, even on minimum boost, due to severe boost leaks :(

When its all finished i would love to see his dyno sheet overwritten on my RB20 graph from when we compared my RB20 with TD06 against Phils RB20 with HKS GT-RS. It looks to be making about double what i make at 3,000rpm and the little 20 doesnt catch it until 4,700rpm :thumbsup:

Hm...should i throw away the RB26 bottom end? When you get it all sorted Leigh i woudl kill to be taken for a drive in it :whistling:

Mafia,

Here's a friends old mainline dyno sheet. The car was running an XR6T turbo 1.06 rear, rb30det.

Inlet/exhaust manifolds all standard.

I believe rev cut was at 7000rpm.

Dyno roadsped appears different so no doubt a torque comparison is out of wack. :thumbsup:

Why don't dyno operators just leave it as a set value so we can all compare easily. :whistling:

----

Where does it make its 13psi? ~3k?

post-382-1190640729_thumb.jpg

yeah roy no worries i will take u for a spin... as soon as the silicon joiners come in i will be going up to get it re tuned.. so i will keep you posted..

oh does any1 have a spare rb30 bottom end in good condition.. haha just preparing for when this one goes BOOOOOOOOOOOOOOM!!! hahaha

when i go to wind up the boost how far do you guys think i should go?? i want it a little reliable i dont want to be going through bottom ends every month... i was thinking round 17-18 psi???

Sky30's 320,000+ km RB30 held 380rwkw and prior to that 312rwkw without problems for quite some time.

Providing you don't rev it past 7k on its stock rods, motor is in good nick and tuned well it will be fine.

Rbman's currently has his stock rb30 bottom end reving to 7.3k as its holding power well to that rpm; doesn't appear to be having issues.

I have my limiter at 7k; still haven't quite got the hang of keeping it off the limiter in first and second. I recently gave the subframe 12mm rake which has improved weight transfer 2x; I can now feel the arse end slightly sitting down instead of what felt like lifting up and spinning with very little forward movement.

Go 18-20 pounds; you do have lower than 8:1 static comp so it will be fine on pulp. :D

I just looked at the torque figure - holy farken shit

You're making 670nm at 230rwkw at the same RPM as me.

I'm making 702nm at 300rwkw at the same RPm...

so at 300rwkw you'll make probably 150nm+ more!

Checking your dyno sheet, it appears that they both make approximately the same/very similar torque (and therefore power) at 115km/h.

Then the higher boosted 25 makes and holds a higher figure to generate the power recorded. Makes sense really, with power being a function of torque and rpm. Wait until this 30 gets fed a bigger mass (via boost) and hopefully gets some bump sticks that allow it to breathe more effectively. Even if rpm is governed to less than 7k, it will make some pretty good grunt.

If the current peak power rpm @ ~5300 is anything of an indicator, the torque will be stupendous.

Dyno roadsped appears different so no doubt a torque comparison is out of wack. :(

Why don't dyno operators just leave it as a set value so we can all compare easily. :(

What's the difference attributable to? Hasty setup and calibration by the operator, or some real difference in gearing ie. tyres, final drive or gear ratios? If it's a 32 chassis, is it still running a 25DE spec final drive?

Some times it's very good to review the graphs using both engine and road speed. I have an old chart from my bike being dynoed through the gears, before/after final drive alterations. The amount of extra grunt hitting the road in any gear, at any sane speed was significant. :(

What's the difference attributable to? Hasty setup and calibration by the operator, or some real difference in gearing ie. tyres, final drive or gear ratios? If it's a 32 chassis, is it still running a 25DE spec final drive?

Some times it's very good to review the graphs using both engine and road speed. I have an old chart from my bike being dynoed through the gears, before/after final drive alterations. The amount of extra grunt hitting the road in any gear, at any sane speed was significant. :(

Its an R32 chassis.. Setup by the operator is what the problem is.

Mine making its peak power at 6k with basically the same turbo is starting to make me think getting a little head work and port matching done is most definitely worth its while. Can't wait to get the lumpy 805c grinds in to it. :(

...wow was lucky enough to have a ride in this weapon yesterday, the torque is absolutely unbelievable. Having basically no traction till 4th is definitely a thrill too. Congratulations Leigh, absolutely siked for you!

Go 18-20 pounds; you do have lower than 8:1 static comp so it will be fine on pulp.

18-20 pounds it is.. haha

That's great, congrats!

I am thinking of doing the same in my 34. Where'd you buy the motor from or did u have a VL/R31 for parts?

Cheers.

i just bought a rb30 off a mate for $100..

Out of interest, did you do any timing belt tensioner re-locations, and which timing belt did you use?

yeah i bassically just followed the rb30det guied in cubes sig...

did you use fresh rings or just grab the bottom end and bolt it up?

no freshen up just a bog stock bottom end with the head bolted on top.. just as GTST says...

thanks guys for all the coments!!! just heard the silicon joiners are in the mail so hopefully they wont take too much longer..

hey just a quick question..just say u had a 32 gts4 or a gtr and u wanted to do the rb30 bottom end with rb26 head would u be able to keep the awd(atessa) in?

would it fit or would u have to remove it??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...