Jump to content
SAU Community

Recommended Posts

everyone knows how horrid the r34 gtt stock gauges are so im about to replace them with a set of defi gauges. if i purchased another 2 i would get a good deal.

so the question is, what 5 gauges should i get? i understand that boost, water pressure, oil pressure, exhaust temp, manifold pressure are popular ones.

basically what 5 gauges would u set up in your car if u had the chance

Edited by R34NRG
Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/
Share on other sites

Ive got defi's for my r34gtt - boost / water temp / oil pressure / oil temp / big defi tacho with shift light

only other one im looking at getting is exhaust temp....helps you know when your about to melt things :domokun:

have u got any pics mate? would love to see em!!!!

wat colours did u get?

me personally am going for the red set

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3370313
Share on other sites

1. PSSSHT value

2. CHUCHUCHUCHU-meter

3. +40PSI reading boost meter

4. 8"-12" monster tacho

you know me, id get em if i could :domokun:

do we have any SAU traders that sell defi guages?

would like to compare prices

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3370336
Share on other sites

havent fitted them yet to the r34 yet took them out of my ceff when i sold it and now i have the r34 i'll whack them in when i get some time (and a sandwhich plate)

i went the white black outs exept for the tacho its the other version as they didnt make a black out tacho (bugger)

got them through cj motors off the silvia forums he's in brisbane and super fast turn around for stock...i highly recomend him.

apparently the exhaust temp will also give you a hint as to when stuffs leaning out...or so ive been told by a few workshops so im looking into sourcing one before i install the rest of the set..

be sure to post pics when its done man!!!

they been going for around the $215 mark but ive seen some for $250.

how much did this brissey guy give em to ya 4

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3370357
Share on other sites

I have,

Oil temp

Oil pressure

Water temp

Exhaust temp

Fuel pressure

Turbo

5 mounted in the centre part where air cond stereo etc used to be

and near the a pillar

you've also got to mount the control box somewhere too. so keep that in mind!

but this is in a 32 gtr

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371362
Share on other sites

im not a expert but could someone explain why oil pressure would be more importent then......lets say for arguments sake manifold press?

just to get a better understanding of what my setup on my type of driving could be suited for

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371579
Share on other sites

im not a expert but could someone explain why oil pressure would be more importent then......lets say for arguments sake manifold press?

just to get a better understanding of what my setup on my type of driving could be suited for

manifold pressure would be quiet similar to boost pressure/turbo... (i think)

oil pressure is probably the most importiant out of the lot, without pressure how are your internals going to survive!!

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371604
Share on other sites

im not a expert but could someone explain why oil pressure would be more importent then......lets say for arguments sake manifold press?

just to get a better understanding of what my setup on my type of driving could be suited for

Because low oil pressure is a hell of a lot more pressing problem than low manifold pressure and indicates a serious problem such as oil pump failure, oil surge etc. Something you'd be really keen to playback after a hot lap.

Besides the manifold pressure gauge is for a NA car if i am not mistaken.

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371619
Share on other sites

everyone knows how horrid the r34 gtt stock gauges are

Horrid? Nope. I think they aren't bad for stock gauges unless you are aiming to impress Paul and Vin when V-tec kicks in yo.

Admittedly I've upgraded to the Nismo gauges but hey, they work.

I'd like to see -

1. Dose/flutter meter

2. KM's to Noble Park Macca's

3. RPM till V-tec kicks in yo

4. $ left till I've payed the car off

and last

5. Number of Bush cops I've noted on the way to Noble Park Macca's

:)

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371650
Share on other sites

im not a expert but could someone explain why oil pressure would be more importent then......lets say for arguments sake manifold press?

just to get a better understanding of what my setup on my type of driving could be suited for

Because you car's blood is oil, no oil = dead engine. Low oil pressure = problems so it's nice to know what's going on.

Manifold pressure means nothing unless your floor pan falls out when you exceed it's limit, most likely from too many NOS shots.

fast_furious_image.jpg

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371664
Share on other sites

Because low oil pressure is a hell of a lot more pressing problem than low manifold pressure and indicates a serious problem such as oil pump failure, oil surge etc. Something you'd be really keen to playback after a hot lap.

Besides the manifold pressure gauge is for a NA car if i am not mistaken.

If your oil pressure has dropped off, the damage is already done.

Especially @ 7000rpm. IMO the oil pressure isnt that much of a help (over the stocker gauge). As ye, once you've done your dinner... thats it.

Link to comment
https://www.sau.com.au/forums/topic/186440-defi-gauges/#findComment-3371668
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...