Jump to content
SAU Community

Data Scan for Skyline

dajorad

By dajorad,
in General Maintenance

 Share

Recommended Posts

TomR33 Collaborator

TomR33

Posted
Posted

No, it's not really an Rs232c protocol.

I have writen by now 2 applications that use the consult protocol: Data Scan - for monitoring and logging a real time data and Rom Reader - for downloading the ROM data.

The Data Scan is especially good for diagnosing faults and those flat spots. You can see some of the logs that i have done here:

http://home.iprimus.com.au/tkolo/datalog.htm

Tom

dajorad Rookie

dajorad

Posted
  • Author
Posted

The CMX100 looks like a cool little unit. But it measures just 4 parameters. I presume you had to 'guess' the format of the commands to get the other parameters based on the commands from the CMX100.

What are your plans for the software you have written?

  • 2 weeks later...
paulr33 Grand Master

paulr33

Posted
Posted

Its for the factory ECU. It plugs into the diag port on the r33 and then connects to the laptop. The conzult software then translates all the responses from the diag port into stuff on the screen, much like the screen captures from the 300zx-twinturbo site.

The 300zx guys tested on an rb25det and it didnt work.

So their site says anyway:)

The only thing stopping you from doing this yourself is

1) you need the plug so you can plug your PC into the conzult port _ well i guess you could guess the wiries and make a custom plug

2) you need the software that communicates with the port - 300zxtwinturbo wanna sell it for $600 a pop and that include a cable to plug into the conzult port

nissan have a hardware version which is worth around 19k brand new. you cant buy nor can use it. its like the hand controller for the apexi powerFC, similar concept, all handheld changes and stuff, no need for laptop.

TomR33: Can you help out with 1 or 2?

siksII Grand Master

siksII

Posted
Posted

Maybe the guys on aus300 just dont wanna share, i hear the owner of that system on the forum is not the friendliest guy.

Im meeting up with a good mate off the 300 forum today, ill ask him :) i know he has used conzult system on his 300ztt

edit:forgot to add that there are LOTS of similarities between vg30 and rb series engines, in terms of electrics, sensors etc..so id be surprised if it didnt work...

paulr33 Grand Master

paulr33

Posted
Posted

Albeit its mainly only used for fault finding and the like. Shows sensor failures and their values. Yes you could data log the 1/4 mile etc but not sure how useful it would be on a day to day basis.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...