Jump to content
SAU Community

Recommended Posts

Personally I wouldn't touch a 260z. I'd leave it original. It is already slowly starting to fetch more and more money (I have seen some go for over 15k) and if the trends continue I think it is going to be a true classic car a few more years down the track. I would love to get my hands on a 260z.

the reason why i was going for a rb25de and not rb25dett is cause of that stupid p plate law and too many cops no me :blush: as for goin for the L28 turbo its going to cost nearly as much but is very hard to track down tubo set ups in australia because they only came out in the usa

ps i have 2 260z :)

yeh they do go for that price sometimes i was lucky enough to get my second z for that price although it was quite rusty, its taken nearly 2 mounths to cut the rust out and glass and weld the rust holes and the was some bigens so for about an extra $500 of sheet matal, welding rods, glass and some blade putty im now upto $1000 minus seats and carpet and its still unpainted.

as for my first z its cost bout $5000 and it has reconditioned struts $500, recon front end $500, new exaust (yet to be put on), recon 350 holley $120 (its too small need bigger), new/old simmens rims $300, new carpet $200, new tyres $680, new gbox $300 but the price riped me and moved to uk so ill need a new one again plus bits and peices valued at bout $150, so in total money spend rebuilding =$2750 plus $2650 for the car hears some pics still more to do and the spoked rims are no longer on the car but still have them

post-42723-1190944711_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...