Jump to content
SAU Community

Gibson Motorsport 32 Gtr Back In Action..

88silhouette

By 88silhouette,
in Motorsport Discussion & Builds

 Share

Recommended Posts

88silhouette Grand Master

88silhouette

Posted
Posted

little birdie tells me that one of the GMS HR31s that currently races in the Group A/C historic racing category has been sold

good reason for this

the ex-owner wants to start racing (his) the GMS R32 GTR. this thing will be brilliant to watch at the track.

anyway perhaps 31Gun can shed some more light on this..

should make next years Group A/C racing bloody excellent to watch - only downside being that the 31s are gonna be copping a hiding from the godzilla

bring it on!!!

Roy Grand Master

Roy

Posted
Posted

Actually, its good and bad news in my eyes. It was good to see the R31s mixing it up with VL Walkinshaws and the promise that a Sierra or two were going to be joining the fray. There was soem good racign to be had. Only if the R32 starts running it will no doubt enjoy a 1-2 second advantage :P

shepo Experienced

shepo

Posted
Posted (edited)

The rumours im hearing is that both the Gibson cars and the GIO GTR will be running soon, also ive heard that a guy in the vic south eastern suburbs has recent brought over the blue calsonic GTR from japan.

theres also i belive 2 more HR31's coming into the country, so its gonna be skyline mania from next year in the historic touring cars!

cant wait for phillip island in feb next year!

Edited by The only ways is sideways
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Ye Hooks posted it up in the Vic Events bit Mark :P

Terry sold the 31 to the owner of Sizzler, and then purchased the GTR :P

But the historic meet wont have a few there like it was meant to due to circumstances :(

31GUN Proficient

31GUN

Posted
Posted

Actually, Terry already owned the Godzilla.

And the bluebird, DR30, and Gazelle.

My take on it is that Rod just keeps getting quicker, Chris is a damn good driver to boot, as witnessed by his win at E/C.

And Terry don't like to lose.

So its the old 'bring a gun to a knife fight' thing :thumbsup:

Hooks

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...