Jump to content
SAU Community

This Is F'ing Dumb...

Modena

By Modena,
in General Automotive Discussion

 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
Posted

firstly its only worth $200,000 and secondly it was mostly stripped of parts prior to crushing. don't believe the hype. the same shit happens in Australia when customs catches illegally imported cars. I know of one compliancer under the old CPA scheme who had roughly $150,000 worth of Rav4's crushed for illegally importing them without approvals.

Also keep in mind that the money to buy these cars don't come from hard earned wages. they come from drugs, prostitution and other illegal sources. f**k em, if you don't set a precedent the cockjockeys will never get the message.

Pulling a stunt like that requires big balls, especially in a place like Thailand, the people involved took a huge punt and got caught out. This is the same government that censors/blocks google and youtube... they're not afraid to enforce the law to the letter of the word.

this has no relation to the GDP of the country, the people involved in this are richer than a lot of people in australia... there's a very big economic imbalance in these regions. Even if that car was auctioned not a cent of it would have gone back to the people. It'd merely have channeled itself back into a politician/official's pocket or the perps themselves.

nissanskyrice Collaborator

nissanskyrice

Posted
Posted
Yeah? google and youtube aye.....damn governments...I also hear that they have banned all "adult' Entertainment.....No more shooting ping pong balls for tourists anymore :(

Well thats another place crossed off the list of places I'd like to visit. Nudge, nudge, wink, wink, say no more. :no:

m3gtr Grand Master

m3gtr

Posted
Posted (edited)
nice avatar..

kinda sad, but i understand it. i wasnt gonna buy it so meh.

Im glad you like my wife... your missus doesnt look too bad either..is she a butterface though??

ive been requested to remove it many times for it being overly sexual for a family website...!! :ninja::P:)

oh and for the guy who made the comments about ferraris sucking id like a 2000 word essay from you by tomorrow on what you have based that opinion on. Cheers.

Edited by m3gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...