Jump to content
SAU Community

Recommended Posts

But the best thing about this one is it has one of Duncans attessa controllers, so I can make it very rear biased and hopefully be able to handle it!

Um.... actually it won't. The lowest setting on those controllers is "standard" and all other settings are just increases in FWD bias.

Sorry but the only way you are going to make it more RWD biased is to take the front shaft out or avoid accelerating hard in a straight line. :banana:

Anyways.... Go Saints.

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

street class - street tyres (>100 UTQG)

race class - semi slicks

I think the international "rules" are >140 UTQG. I don't think a blanket tyre rule is the best answer but it's certainly a lot simpler than some of the other ideas going round. Simple is best.

I agree that Russ should be left to come up with some rules and put them up. Not everyone will agree with them, but if he is putting in the effort to organise such a huge event then I think he should get final say and be respected for it.

I'm sure Russ values the opinions posted here but it is his series and I'm pretty sure he has a set of rules in mind which will be made available as soon as they are finalised. People then have a choice, run within the rules or don't run.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

I think those rules look pretty reasonable, except perhaps considering the intended japanese focus of this event would mean that the widebody/overfender rule for street class wouldnt be too appropriate, considering there would be a fair number of purely street driven cars with overfenders or widebody conversions.

EDIT: Just read the modified class rules where widebodys etc *are* allowed.

I guess this would now more depend on whether 3 classes are needed/desired...

Also, just my personal opinion, I dont see why headlinings should be removable in street class.

Carpets are a bit iffy, but I guess justifiable considering some people do drive without carpet in their street car...

But really, removing roof linings would be moving a little bit too far away from street cars I believe.

I also think the no pro drivers for street class rule is a good idea

Edited by swanny180

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well :banana:

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? I think the rule of no slicks, any tyre up to semi slicks is my suggestion. Most competitors will not run street rubber if they want good times, so having a street tyre class, and a semi slick class is a silly thing. Just make it any tyre people want to run, but they must have tread pattern. Done. Remember, it's about keeping it simple.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :)

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :)

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :no:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :no:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? ;)

Merry Xmas

Gary

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well ;)

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

only reason is that time attacks have street tyre and semi slick classes, and no full slicks. is there any reason it should be done different here?

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

if the classes are going to be based on mods, then using an established set of rules makes alot more sense than trying to come up with your own. either Duncan's (I think it was) suggestion of using Production and Improved Prod rules or the Rev Speed rules.

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? ...having a street tyre class, and a semi slick class is a silly thing.

isn't that how the original time attack rules are - street tyres and semi slicks?

isn't that how the original time attack rules are - street tyres and semi slicks?

Not sure how they group the classes/results, but I was referring to the rules not permitting full slicks. I still think the street tyres are a waste of time hehe ;)

Gary has some good points tho, whatever rules Russ comes up with should be relevant for Australia, and not include over-complicated restrictions..

Merry Xmas all!!

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :laugh:

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :nyaanyaa:

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :nyaanyaa:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :nyaanyaa:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? :)

Merry Xmas

Gary

that is pretty retarded. is this a cams rule list? of the top of my head 048 advans come with 60 treadware lol.

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

I've tracked less powerful cars, my stock s2000 and C32AMG, with street tyres before. After a couple of laps the tyres got too soft and it's not much fun. The stability control on the Merc prevent the car from loosing control but the s2k is more than a handful to control. The attessa system on the GTR is a beauty. With twice the power output of the c32, it doesn't have significant stability problem with street tyres until the tyres get too hot. So, it really depends on the format of the time attack. If it's a 20 mins session, then I would hate to see accidents on the track because people run around on overheated street tyres just because they want to qualify for this class. Also by allowing people to run only street tyres, you are not bridging the gaps between modern cars with stability control and cars without any electronic stability control system

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

The questions are do we want any leveller in a time attack event where we should be trying to get the best time we can achieve and what is stopping someone from winding down the boost and use street tyres?

What ever the classes will be, I will be keen to attend all of them if possible. I just hope that the rules will be simple without too many restriction. I will use all tyres; street, semi and slick; to see what is the best time I can achieve....just for the fun of it. As mentioned before, the winners will still be $100+g gtr and the extreme European exotica. Neither of which will be mine :(

Edited by 9krpm
hey duncan

what compound are the ao48's??

There are 3 "compounds" of A048, so called "soft", "medium" and "medium/hard", not all compounds are available in all sizes and to further complicate matters, Yokohama Australia (in their infinite wisdom) don't bring in all the available compounds and sizes. Consequently it woiuld be my understanding that Duncan has to race on "medium/hard". This season we changed one of the race team cars (not a Skyline) from 17" wheels to 16" so we could run the "mediums", result being 0.75 secs faster at OP. With no discernable difference in tyre life.

So if you are contemplating running A048's I strongly suggest that you check the sizes and compounds first, before you buy wheels (too late he said).

Happy New Year

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...