Jump to content
SAU Community

Recommended Posts

But the best thing about this one is it has one of Duncans attessa controllers, so I can make it very rear biased and hopefully be able to handle it!

Um.... actually it won't. The lowest setting on those controllers is "standard" and all other settings are just increases in FWD bias.

Sorry but the only way you are going to make it more RWD biased is to take the front shaft out or avoid accelerating hard in a straight line. :banana:

Anyways.... Go Saints.

  • Replies 705
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

street class - street tyres (>100 UTQG)

race class - semi slicks

I think the international "rules" are >140 UTQG. I don't think a blanket tyre rule is the best answer but it's certainly a lot simpler than some of the other ideas going round. Simple is best.

I agree that Russ should be left to come up with some rules and put them up. Not everyone will agree with them, but if he is putting in the effort to organise such a huge event then I think he should get final say and be respected for it.

I'm sure Russ values the opinions posted here but it is his series and I'm pretty sure he has a set of rules in mind which will be made available as soon as they are finalised. People then have a choice, run within the rules or don't run.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

I think those rules look pretty reasonable, except perhaps considering the intended japanese focus of this event would mean that the widebody/overfender rule for street class wouldnt be too appropriate, considering there would be a fair number of purely street driven cars with overfenders or widebody conversions.

EDIT: Just read the modified class rules where widebodys etc *are* allowed.

I guess this would now more depend on whether 3 classes are needed/desired...

Also, just my personal opinion, I dont see why headlinings should be removable in street class.

Carpets are a bit iffy, but I guess justifiable considering some people do drive without carpet in their street car...

But really, removing roof linings would be moving a little bit too far away from street cars I believe.

I also think the no pro drivers for street class rule is a good idea

Edited by swanny180

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well :banana:

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? I think the rule of no slicks, any tyre up to semi slicks is my suggestion. Most competitors will not run street rubber if they want good times, so having a street tyre class, and a semi slick class is a silly thing. Just make it any tyre people want to run, but they must have tread pattern. Done. Remember, it's about keeping it simple.

Just to throw a cat amongst the pigeons and get you all talking somemore, Redline Time Attacks 2007 Rules: http://www.redlinetimeattack.com/docs/2007...tackRulesV2.pdf

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :)

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :)

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :no:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :no:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? ;)

Merry Xmas

Gary

Lets not forget that this is intend to be a SAFE time attack event. The intention is build your best car, try to have fun on the track and achieve the best optimal time (SAFELY). It's looks like the main sticky point here is tyre selection. Is there any reason why we could not have 3 simple and fair classes of shonky street tyres, semi slick and slick?

Personally, I don't care about a $50 trophy. I care about the racing spirit, my safety and being able to drive the car to the track without getting ping for using slick on the street. I will never put street tyres on my GTR cause it's just so unsafe and I will get kick off the track for drifting as well ;)

So can we agree to disagree on the tyre aspects. What's next? Trims/panels/chassis modification?

only reason is that time attacks have street tyre and semi slick classes, and no full slicks. is there any reason it should be done different here?

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

if the classes are going to be based on mods, then using an established set of rules makes alot more sense than trying to come up with your own. either Duncan's (I think it was) suggestion of using Production and Improved Prod rules or the Rev Speed rules.

If you're talking about the 'racing spirit' and it's being called a "time attack" event, then shouldn't there at least be some effort to align with the original Rev Speed event rules? ...having a street tyre class, and a semi slick class is a silly thing.

isn't that how the original time attack rules are - street tyres and semi slicks?

isn't that how the original time attack rules are - street tyres and semi slicks?

Not sure how they group the classes/results, but I was referring to the rules not permitting full slicks. I still think the street tyres are a waste of time hehe ;)

Gary has some good points tho, whatever rules Russ comes up with should be relevant for Australia, and not include over-complicated restrictions..

Merry Xmas all!!

There is some dumbarse stuff in there;

- Sequential Gear Boxes Not Permitted in Street Class.

- Sequential Gear Boxes Not Permitted in Modified Class.

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a sequential gearbox :laugh:

- All Street Class vehicles must use DOT street tires with a UTQG tread wear rating of 140 or higher, Tires with UTQG tread wear rating under 140 are not permitted in Street Class

But sir, my car (35GTR, M3, M5, VW, Audi etc etc) comes standard with a tyre rated less than 140 :nyaanyaa:

- All Modified Class vehicles are required to use DOT approved tires with UTQG tread wear ratings of 50 and above. Tires with less than a UTQG rating of 50 are not permitted in Modified Class.

No problem, Hoosier make a tyre that has a rating of 50 printed on it, but it's really a 30 :nyaanyaa:

- Front under tray cannot go rearward past the center-line of the front axle

But sir, my car comes standard with a front undertray that goes rearward past the centre line of the front axle :nyaanyaa:

And lastly;

- All vehicles must use tires that are legal for use on public roadways in the United States, Japan or the European Union.

What about us Ozzies? :)

Merry Xmas

Gary

that is pretty retarded. is this a cams rule list? of the top of my head 048 advans come with 60 treadware lol.

there's nothing unsafe about using road tyres on a race track. but if you think you have too much power for them, then stay on your semi slicks and run in that class. no problem.

I've tracked less powerful cars, my stock s2000 and C32AMG, with street tyres before. After a couple of laps the tyres got too soft and it's not much fun. The stability control on the Merc prevent the car from loosing control but the s2k is more than a handful to control. The attessa system on the GTR is a beauty. With twice the power output of the c32, it doesn't have significant stability problem with street tyres until the tyres get too hot. So, it really depends on the format of the time attack. If it's a 20 mins session, then I would hate to see accidents on the track because people run around on overheated street tyres just because they want to qualify for this class. Also by allowing people to run only street tyres, you are not bridging the gaps between modern cars with stability control and cars without any electronic stability control system

the point is its a much easier way to seperate the classes than trying to make your own rules based on levels of modifications. your case is a perfect example - a heavily modified car won't want to run on street tyres and therefore will be in the race/semi slick class. perfect. doesn't mean the street tyre class shouldn't be there for less modified cars. And if a heavily modified car were to run on street tyres, they'd probably struggle to beat much less modified cars that aren't overpowering their tyres, so they act as a bit of a 'leveller'.

The questions are do we want any leveller in a time attack event where we should be trying to get the best time we can achieve and what is stopping someone from winding down the boost and use street tyres?

What ever the classes will be, I will be keen to attend all of them if possible. I just hope that the rules will be simple without too many restriction. I will use all tyres; street, semi and slick; to see what is the best time I can achieve....just for the fun of it. As mentioned before, the winners will still be $100+g gtr and the extreme European exotica. Neither of which will be mine :(

Edited by 9krpm
hey duncan

what compound are the ao48's??

There are 3 "compounds" of A048, so called "soft", "medium" and "medium/hard", not all compounds are available in all sizes and to further complicate matters, Yokohama Australia (in their infinite wisdom) don't bring in all the available compounds and sizes. Consequently it woiuld be my understanding that Duncan has to race on "medium/hard". This season we changed one of the race team cars (not a Skyline) from 17" wheels to 16" so we could run the "mediums", result being 0.75 secs faster at OP. With no discernable difference in tyre life.

So if you are contemplating running A048's I strongly suggest that you check the sizes and compounds first, before you buy wheels (too late he said).

Happy New Year

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...