Jump to content
SAU Community

Qld - Lakeside Raceway Gets Green Light From Council

lakesideguy

By lakesideguy,
in Motorsport Discussion & Builds

 Share

Recommended Posts

lakesideguy Contributor

lakesideguy

Posted
Posted

Media Release

Lakeside Raceway gets Green Light from Council

27/09/07 - After a six year saga, on Tuesday 18 September 2007, the Pine Rivers Shire Council voted to enter into a lease with Wrexmere Pty Ltd (Queensland Raceway) to re-open and manage the historic Lakeside Raceway on Brisbane's north side.

The deal still must obtain State Government approval and the lease has not yet been signed, but neither party foresees any major delays.

Lakeside Motor Racing Enthusiasts president Ian Milton said,

"Credit to the Council for demonstrating the vision and determination necessary to deliver a victory for ratepayers, motorsport and common sense. Lakeside will deliver long term economic, social and life-saving benefits to the whole community."

While very pleased with the progress, John Tetley of Queensland Raceway cautioned,

"This is just one more step along the way. Albeit a big milestone, it's not the last milestone by any means."

Work remains before Lakeside can once more be operational. Even though most neighbouring residents chose to live in the area long after the race track was established in 1967, Mr Tetley is currently visiting the UK as part of the continuing effort to incorporate the concerns of neighboring residents.

"Many of the UK tracks have fairly severe noise restrictions and I think there is a lot to be learnt from them", he said.

"Without a lot of physical support for tidying up tyre walls, repairing ARMCO etc, it is possible we will not re-open with racing for some time, but instead concentrate on low investment, low revenue activities as the business finds its feet again and builds up some spending money. That is not to say there won't be speed events like sprints, but full-on racing may have to wait until we have the money to pay people to fix the edges, drains, tyre walls etc."

Cr Bob Millar sits on both the Pine Rivers Shire Council's Strategic & Planning and Co-ordination committees responsible for approving the Lakeside Raceway lease. He said,

"I think it's good for the ratepayers to finally reach a point, after a lot of time and effort has been spent on the concerns of residents, to get to where we can now move forward."

Council minutes showed one of the Co-ordination Committee's recommendations as,

"In addition to the operational and capital development matters, the lessee, in consultation with Council, is to include in the capital improvement program construction of a barrier at the western end of the circuit (known as the Carousel). This barrier may take the form of a vegetated mound or similar barrier."

When asked when he expected to see Lakeside re-start operations, Cr Millar replied, "Two years ago!"

Mr Milton reaffirmed LMRE's position,

"We've always said we'd support the bonafide winner of the Council's tender process and we're very pleased to get to this point after years of people saying that Lakeside was dead and buried, but now it's up to the motorsport community to determine Lakeside's future."

###

Stupid Toyota Enthusiast

Stupid Toyota

Posted
Posted
fantastic!! hmmm sounds like , i wont be using a side pipe though! :P

Now you know why my car has a big muffler and sounds so quiet when its circulating :) . I set it up for this exact outcome

(Plus I hate the noise from un-muffled cars... awful awful awful)

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

it would be great to finally get back onto Lakeside! Hopefully it can all start to happen now without any more delays. It must be almost a year since PRSC announced that QR/Tetly was the successful tender...

my side pipe will have to go too, but I'm more than happy to do that for another chance to run there. Finally QLD will have a racetrack to get excited about again! QR is a bore. Morgan Park is OK, but not a patch on Lakeside's fast and challenging layout.

RSC41 Contributor

RSC41

Posted
Posted

its about bloody time. hopefully it lasts. i member i did a 2 day driver training day out there couple years ago and on the 2nd day the instructor said we had to keep the noise down because the neighbours had complained the previous day. ITS A RACE TRACK FOR GODS SAKE!

  • 2 months later...
lakesideguy Contributor

lakesideguy

Posted
  • Author
Posted (edited)

MEDIA RELEASE

Long Lease Locks in Lakeside

For Immediate Release: 18 December, 2007

Brisbane, Queensland - Supporters of Queensland's Lakeside Raceway received an early Christmas present this year with the Pine Rivers Shire Council and Wrexmere Pty Ltd (Queensland Raceway) signing off on a long term lease to operate the historic circuit on Brisbane's north side.

The agreement for 30 years, with an option for 10 years, obtained State Government Ministerial approval and will insure the facility celebrates its 50th anniversary on 19 March 2011.

Lakeside Motor Racing Enthusiasts president Ian Milton said,

"We're delighted and relieved by the news, but if we want to get on the track, everyone will have to pitch in and do their part - there's no more excuses for sitting on the sidelines."

When asked what the major challenges were to getting club-level motor racing back to Lakeside, John Tetley of Queensland Raceway said,

"We have all the usual major project hassles including red tape, availability of scarce resources, etc."

Mr Tetley said that an initial $1.2 million has already been secured to invest on rebuilding infrastructure and,

"The rest will depend on how wisely we invest the initial capital input and how many people come and spend their money there."

"We're targeting and hoping to re-open the driver training in February or March next year. Racing, maybe June, depending on a lot of variables including re-education of competitors and neighbour management."

Pine Rivers Shire Councillor Mike Charlton was very excited to declare the situation as "all systems go!" He described the council's vision for Lakeside as,

"Preservation of an iconic motorsport site embracing historic, commercial and club motorsport activities, combined with life-saving driver and rider education and community events."

Cr Charlton said that a legal action in the Planning & Environment Court between the PRSC and Mr Ron Curtis is "unlikely to delay" and is confident in their legal advice because it is "tried and tested" law. Last month a local newspaper article revealed that people had been listed as co-applicants without their permission. The action has been adjourned until 23 January, 2008.

Mr Milton pointed out the significance of events,

"An historic moment is occuring for the people of Queensland, and particularly the motorsport community, because I can think of no other example of a motor racing circuit in Australia being brought back from the brink like Lakeside."

"On behalf of LMRE members, I would like to extend a sincere invitation to anyone who has a passion for motorsport to help us get this deal over the line by registering on-line to help reconstruct Lakeside. You don't need to be an engineer, just bring the right attitude. To be part of history, please visit this site and fill in the form - www.queenslandraceway.com.au/qrformlake.php. "

For more information visit www.lakesideraceway.com.

###

Edited by lakesideguy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
    • MBS206
      remote oil cooler hose size, 8,10 or an12?

      By MBS206 · Posted

      -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
×
×
  • Create New...