Jump to content
SAU Community

Recommended Posts

not sure why google didnt pick that up... or how i missed it lol. Good info there tho.

Im looking for a turbo for my RB25 thats super resonsive, capeable of around 240-260 rwkw (with a small amount of headroom)

Read up on this one... can somone pick the specs out of this selection that would be best suited?

Billet S-3 (Internally Wastegated)

• Standard compressor options

Billet-S 56 trim, Inducer 57mm, Exducer 76mm,

Billet-S 52 trim, Inducer 55mm, Exducer 76mm,

Billet-S 48 trim, Inducer 53mm, Exducer 76mm.

• Standard compressor cover options

T04B .70 A/R,

T04E .50 A/R,

T04E .60 A/R 3” inlet, 2” outlet.

• Compressor cover optional upgrades

Billet .70 cover 4” inlet, 2.5” outlet.

Bullet port shrouded Billet .70 A/R cover 4” inlet, 2.5” outlet.

• Standard turbine

Billet-3. Inducer 65mm, Exducer 56.6mm

• Internally wastegated T03 foot print exhaust housing options

.48 A/R, .63 A/R, .82A/R, 1.06 A/R.

• Actuator pressure options

7psi, 9psi, 12psi, 14psi, 16psi, 18psi, 20psi.

• Includes actuator and flapper

• 350hp to 550+hp

yeah is th billet turbo place mr turbo? or are they differant.

oh and from what i can see.. they are pretty much a turbonetics dual ceramic bb but with a bilet centre

The Billet Turbo's are not the same as Turbonetics at all.

Completely different bearing design altogether and different wheels.

Read this: LINK

Some insight there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...