Jump to content
SAU Community

Anyone Have A Stock R33 Gtr For Compliance (willing To Pay $$$)


Recommended Posts

Hi,

I am in a bit of a situation with compliance. Compliance have advised my car is too heavily modified to be complied without having a stock R33 GTR onsite for 1 to 2 weeks.

My importer is also trying to organise a car but he has not been able to do this yet.

EDIT - Ive decided that I should probably sort this out directly with the importer and compliance workshop.

This post was made while on holiday so I should have probably put more thought into it before posting....

Regards,

Gareth

speaking from experience, how definite is the 1 - 2 weeks time frame? Compliance and time frames don't work well together, i find a factor of 10 fits the real world.

maybe a import yard/dealership could help? maybe one of the SAU traders? i don't know if 'all blitz' is still selling cars

EDIT: by selling, i mean, possibly has an un-owned R33 GTR that could be given up for a few weeks

What parts are you talking?

Sounds like highmount turbos along with other things, in which case someone i dont think you'll find one easily.

Being the donor car will be stripped of its parts to go onto yours, someone probably wont just 'give' you their car to let some random strip it and then re-fit.

Compliance rules arent exactly hard to understand, you should have known before bringing a highly modified import into the country that it wasnt going to pass.

Compliance rules arent exactly hard to understand, you should have known before bringing a highly modified import into the country that it wasnt going to pass.

Yes I understand the compliance rules.

I would not personally call the car heavily modified, when I bought it I was not aware of all the modifications. I only knew about what the importer told me. I dont believe he was fully aware of the modifications either.

The turbos are stock as far as I know, its mainly the number of small changes.

And this was through a broker, through a company.

Being the donor car will be stripped of its parts to go onto yours, someone probably wont just 'give' you their car to let some random strip it and then re-fit.

I will give the importer some time to see if he can sort this out for me, I am offerring to pay some money for it but I am not exactly rich.

The car would be used for compliance purposes, once I am past compliance its all fine.

Anyway, I will await an update from the importer.

Apologies for the random post, Ive been a little stressed over getting the car on the road.

Regards,

Gareth

may i ask what happened? does it have to be a R33 gt-r?<

PM me if you really want to know....

I think you'll find that not many (more likely no-one) will donate their GTR to get stripped of necessary parts needed for complying your car then put back together...

Maybe you should state which necessary parts are needed to comply your car, rather than someone hand over their whole car to make up for your importer's inspection skills....

doesnt seem right you should have to fork out extra money because the broker didnt no the item he was importing for you ?

id be telling the importer he has until X date to get the car so it can be registered...

I think you'll find that not many (more likely no-one) will donate their GTR to get stripped of necessary parts needed for complying your car then put back together...

Maybe you should state which necessary parts are needed to comply your car, rather than someone hand over their whole car to make up for your importer's inspection skills....

doesnt seem right you should have to fork out extra money because the broker didnt no the item he was importing for you ?

id be telling the importer he has until X date to get the car so it can be registered...

Working on that with the importer, I am really frustrated now. Its disrupting my holiday and the car is still not registered after over 6months!

As for forking out extra money, too late. I've already been screwed over time-wise, with an incorrect valuation, and stroage fees.

Anyway, I've decided that the post was a little pointless so Ive edited my first post.

Regards,

Gareth

sounds painful. good luck though.

lesson learnt - if you're not sure what you're doing with imports, buy a car that is complied and registered here already.

you might find that the 'cheap' self import and compliance costs the same as a importer doing it all then selling it with a margin for him.

sounds painful. good luck though.

lesson learnt - if you're not sure what you're doing with imports, buy a car that is complied and registered here already.

you might find that the 'cheap' self import and compliance costs the same as a importer doing it all then selling it with a margin for him.

Thanks, the main lesson is to be more careful of which importer you use.

Or buy locally....

Care to elaborate rather than just making accusations champ?

I am allowed too ??

I have sent a PM to some_cs_student about what this company put me through and it seems he is going through the same

ok.

will accept the acceptable pm if its acceptably acceptable

in other words, care to send it my way, i may be able to help your cause

ps didnt say he had to say it on here, also maby his post should be deleted as he is making accusations within the same vein

ok.

will accept the acceptable pm if its acceptably acceptable

in other words, care to send it my way, i may be able to help your cause

ps didnt say he had to say it on here, also maby his post should be deleted as he is making accusations within the same vein

It's not accusations so don't worry. I have deleted my post and have pmed you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...