Jump to content
SAU Community

Recommended Posts

hey bud, nope not as yet but thats not were there hitting. Front wheels are scrapping badly on the plastic shrouding so might have to take it all out. Car is not overly low either as you wouldve seen last weekend, can still fit my hand between the tyre/gaurd etc.

Ryan

hey bud, nope not as yet but thats not were there hitting. Front wheels are scrapping badly on the plastic shrouding so might have to take it all out. Car is not overly low either as you wouldve seen last weekend, can still fit my hand between the tyre/gaurd etc.

Ryan

Yeh mate, that inner guard needs to come out and be chucked....lol Lip/roll the guards and drop her a little and bobs your uncle! But going on your previous 32, you know what your doing anyways!! :)

Yeh Boostworx are really good on prices, they charge what people should charge, none of this "yeh mate thats gonna be $1,374,724.00 for that tune" "oh and i boosted it to 2,583psi, But geez look at your power figures"!!

My last tune was through Steve at manta racing and it cost $350. He takes the car to wilall racing where Peter Hall did the tune and my 32GTR put out 292rwkws at only 1.1bar of boost. Martin tuned the car at Tilbrooks before that and the car was doing 299rwkws. Peter however said it was to close to detonation. (same boost)

This is with no cams, standard injectors and no boost controller.

I run 34GTR N1 turbos and they are better than the stock turbos by far. Spool up quicker and more power.(259rwkws)

from stock turbos and nothing else changed.

I didnt think that you could run that much boost on N1 turbos (40psi) . I hit full boost by 4,000rpm .

? where in your rev range would you be able to spool up 40psi ?

haha..it was just an example mate, as in the turbo's can take whateva boost levels you can throw at them. I dont no where in the rev range 40psi would come on but I no people running high 30psi on built engines and they seem to like it.

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...