Jump to content
SAU Community

The Ultimate V8 Experience

SLYNE

By SLYNE,
in Victoria

 Share

Recommended Posts

dave1200 Collaborator

dave1200

Posted
Posted
you just gotta look out for the drifting geminis that will be going faster than you... :P

but seriously, there arent geminis on the track at the same time luckily.

If that were the case you would be my no.1 perfect customer!

If you choose a holden, try and get 'bluey' as its the newest and fastest or supercheap. If you go ford they are all pretty similar. i usually have 'ice freddy' dont ask where they get some of their names...

Hey Ryan do you have any say in the parts they fit in the cars? I hope you didn't recommend they fit those auto adjusting tie rods?

Russman Grand Master

Russman

Posted
Posted
Hey Ryan do you have any say in the parts they fit in the cars? I hope you didn't recommend they fit those auto adjusting tie rods?

:laughing-smiley-014:

I did this about a year ago. Great fun but 5 laps isn't enough. And yeah listen to the instructors to get the most out of it. Unless if you get Ryan...

The day I went 2 cars had a sheared input shaft from people grabbing reverse instead of 4th. Does that still happen? Practice your shifting from 3rd to 4th coz that's all you use in these cars at Calder.

Belsil80 Mentor

Belsil80

Posted
Posted

people think they can make up a ton of time by shifting as fast as they can. they are usually the people who know very little about going fast but try to. The fords have got a hardened input shaft now, which makes them last longer, but they still break eventually. same with the whole driveline, eventually they break, but its usually someone who flat shifts or tries hard to get it into the wrong gear that seals its fate.

None the less, its impressive how much these cars hold up to. in summer on high 30deg days they go all day (8hours) and rarely miss a beat. You could drive them on the limit all day if you look after it.

  • 1 month later...
skiwhine Collaborator

skiwhine

Posted
Posted

make sure u get the new 6L VZ they have, i think they call it nemo (it was a water damaged car) then put on the track, when they got it it had head and cam package pulled like 280kw@rears but the dogs pulled the cam out n put a stocker in so as u guys wouldnt kill urselves lol, but it still has a ported head and higher compression then the rest as well as some neat extractors, deff the 1 to go for!

Belsil80 Mentor

Belsil80

Posted
Posted

not any more, nemo is now the slowest one out there... there are lots of new ones now that are a lot fresher... strangly nemo is the one that got caught in floods in perth i think.. The one you are talking about would be bluey or fuso. they were clubsports therfore they were quicker so they had to slow them a bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Yep will do, thanks for all the help.
    • itsforandres
      BCNR33 Blower Motor Resistor - Testing

      By itsforandres · Posted

      @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...