Jump to content
SAU Community

Recommended Posts

i have a couple friends who use taio's turbos. tr43, tr44, and the new tr29. these were on ca and sr motors.

the only disadvantage is they're not bolt on, and you'll need to get a manifold and/or dump.

my mates are happy with them and havn't had any problems. taio is a cool guy who is also willing to help out if needed.

Nice.. keep the information coming. Id like some info of how they have gone on an RB25 though..

If i get one for my RB25 with the Internal gate that it comes with, what do i need to do to fit it..?

I was told i need a V-Clamp separate...

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :) And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

here's a TR43 on 14psi making 250kws wheels on stock rb25 engine.

r33250kws.JPG

And here's our sponsored R32 drifting with 190kws on 10PSI on TR43 at calder

And here's Our Sponsored S13 CA18det drifting at Winton with 250kws on 16PSI running TR43HF turbo.

Enjoy the show :P And please don't hesitate to pm/contact me if any information is required. Thank you all guys.

hmm interesting.. thinking bout giving garret a miss this time round. so ill need a different manifold. u got a kit for SR20?

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

when can we expect full boost for the non high flow and high flow turbos?

is it very responsive with the setup mentioned above for both highflow and non highflow?

cheers mate

edit: for rb25

Edited by Phantom32

For the TR43 standard on RB25det, turbo will respond from 2000 RPM and kick in full 20PSI at 4000RPM. This is a very responsive and torquey turbo that we recommended to drifters. The high flow will be around 300 RPM less in responds (2300 to 4500 RPM from 0 to 20PSI), It can hold upto 25PSI of boost, and will give you massive mid to top end power. Should be getting around 270ish with TR43 standard on RB25det and over 300KWs with TR43HiF turbo.

For RB20 we can supply you the full kit of:

Tr43 440HP turbo (250kws wheels)

high mount T3 manifold

38mm external wastegate

braided oil feeds

dump pipe bend and fittings

total: $1550

Add $50 more we can high flow this turbo to 500HP (300kws wheels)

That is a really great price.

Well, for warranty side we follow the warranty and service guide from Garrett. Its called "Turbo and CAC Fundamentals". The warranty will be void: due to Liburication issues, foreign object damage issues and faulty workmanship. I have uploaded a copy at:

http://www.digi-hardware.com/TurboCACFundamentals.zip

Its a 96MB file which contains detailed information on turbo installation, trouble shooting and damage analyse.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

To install on a RB25 its best to get the TR43 full kit at $1550 including manifold, ext wastegate, Turbo, oil feed, and dump pipe.

Thats a really good price for a whole kit.

Does it have to be high mounted?

It can't be low mounted on the stock manifold?

And isn't the TR43 internally gated eliminating the need for an external wastegate?

Or its just better to go for the kit for the best results?

Sorry for all the questions man :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...