Jump to content
SAU Community

Recommended Posts

^^^ thats tight dude..... id go down to the station they were from and speak to their superior officer.... state what happened that you passed the breth test and they continued to walk all over you.. checking your car... when they could not find anything wrong they then decided to fine you ... when you asked "officer i think this is false allegation where exatly was i speeding" and he could only reply with "further up the hill" state this to the superrior officer that you work hard and cannot take time off work let alone afford court fees. ask him if their is any other rout you can take. just my 2 cents no idea if it will work or not

on i lighter note just got a brake done... pics below :wub: slotted and dimpled rotors and ebc red stuff pads plus a bit of paint and clear coat :D

post-27156-1208064987_thumb.jpg

post-27156-1208065009_thumb.jpg

Yeh I was going down the station after work tomorrow, hopefully the cop gets a kick up his arse for abusing power :wub: but I doubt it seeing they are their own system :(

By the way your brakes look great. I bet you're dieing to take it out :D When you get your licencse back, give me a buzz so you can take me for a ride in it :D

nice Mark they from the RDA group buy

Glenn if you need a traffic solicitor i have then name of a good one and if it does go far enough to court

1) you dont need to attend as thats his job and

2) should be about to take SAPOL for costs or they will drop all charges and then possibly get them for costs

yeah definatly... hopefully go for regular cruises... 59 more days to go :D only one corner done so gotta get stuck into the rest man its time consuming lol. have a good one dude and good luck tomorrow afternoon at the station

hey steve .. yeh from broup buy... saved a tonne .. thought i might aswell give it a go myself and painty painty at same time lol

have a good one

:wub:

Edited by jenkies

thats sucks if they have no proof of what speed u were doing they shouldnt be able to book u also mark did u decide to keep the rear wing off or did it go back on and weres sum pics of that new interior

hi guys, how be we all?

well this zoo comp is still going and we have both dropped off abit so we are hoping you guys can help us get back up there. We are still on the 1st page, just, and hoping to get back into the top 10 and work our up again from there, so if you guys can throw us some votes it would be awesome, the more votes the better, my link is in my sig pic, just click the pic. THanks guys and girls.

ive got two clusters here pokie with 153tho on it both silhouette ones....if you want

6 cyl ones read differently ryan...............that was the problem thidras had with froggys old CA18 pintara when it wasnt broken

my dad said he got it out of a Pintara, but not an GXE model

would that matter??

yeah all the other gauges are working

i'm not sure if the sender on the gearbox is working

all it means when its not out of the gxe is ya dont get all the gauges you would normally have had (probably dont hav a tacho now)

definitely sounds like the gearbox sender might be playing up

head to u-pull it and find an auto pinny and take the sender out....cost ya like 5 - 10 bucks (or just stuff it in ya pocket and walk out LOL)

oh and morning all

off work sick for 3 days with some wak bug.....................been makin me feel like crap all weekend (admittedly thought it was just an annoying cough)..........

so what better to do with my time than sit online LOL

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...