Jump to content
SAU Community

Recommended Posts

just heard on news update, share market soared today, so dave looks like you could be recovering abit. One of our security guards at work has over half a million dollar share portfolio and he lost over a third of it with the crash, nasty shit :S

yeah, i was pretty stoked when i heard, jumped online straight away and starting having a look how much i clawed back. ended up getting about $10k back, so im pretty happy with that.

Edited by scandyflick
Just ordered one of those stealth cooler kits for my 33. :blink: ... bloody s2 4 doors and their washer bottles under the guard :) ... oh well im selling the kit i have on there now so its all good :)

is that the cooler kit that goes through the factory intercooler holes???

u got pics?

where u getting it from???

what a busy night. Took a s15 gear box out of my mates car and damm they are heavy. Called up 3 guys to come around and help lol. Fitted a xtreme single plate clutch, pain in the ass to do. Wouldnt wanna do a gtr one just yet lol.

yeah i might be up for it. Dunno if it will be easier to drop the whole front cradle tho, as we had to tilt the engine back abit to get some bolts undone. Got like another S15 who needs a clutch done to.

:bunny: ill come help you boys ill cook your lunch

Its genetics I tell you - they all want to be bare foot, pregnant and in the kitchen LOL.

You guys realise thats why brides wear white don't you - its so they will match the other kitchen appliances.

Edited by 4door_Sleeper
we share the house hold duties here, i dirty, she cleans, simple.

LOL

I miss my wife, - but my aim is getting better.

Craig - How can you tell if your wife is dead?

Sex is the same but the dishes are stacking up in the sink!

Edited by 4door_Sleeper
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...