Jump to content
SAU Community

Recommended Posts

Trades are awesome! Love being a plasterer, get to change scenery every few days, hard work, keeps you fit and meet a whole range of funny assed people!

in other words luke you get plastered every day :ph34r:

/lame joke

can anyone tell me how much kw can a standard set of gtr injectors hold and if they fit a gts-t or do you need different ones,

cheers... owww and hopefully im a trade in 2 years lookout everyone. as a fitter/machinist-we are like canaries they send us in the mines first.

can anyone tell me how much kw can a standard set of gtr injectors hold and if they fit a gts-t or do you need different ones,

cheers... owww and hopefully im a trade in 2 years lookout everyone. as a fitter/machinist-we are like canaries they send us in the mines first.

my 26 is running the injectors at 100% and its last dyno reading was 229rwkw, and im pretty sure they fit into RB20's

Speakin of jobs, I love mine! Average around $800-$1000 weekly, freebies.. bonuses, commision, and relaxed as place to work!

Oh and guy, we have a plumber we recommend, can sms you his number tommorow if u want? Best mates with one of the workers, so does a good job if you saw we sent you!

My GTR injectors pretty much max'd as power neared 260rwkw with 11.5:1 afr's.

A little more fuel pressure (1afr point drop on idle) and I've seen 300 with them again at pretty much max duty. :S

i also have a dyno printout thats shows i have 274rwkw and one that says 229rwkw, with no changes to the car at all just different dyno's, but my PFC says they are at 100%, so i have no idea what power reading to believe. Cant wait till saturday so i can see what the boostworks dyno says :ph34r:

I agree, Tradies FTMW.........if my boy doesn't want to go to Uni, I'll definitely steer him towards a trade.

Speaking of tradies, I need to line my shed ASAP, already got insulation just need gyprock or hardie board or blue board.........any Gypies out there??

i also have a dyno printout thats shows i have 274rwkw and one that says 229rwkw, with no changes to the car at all just different dyno's, but my PFC says they are at 100%, so i have no idea what power reading to believe. Cant wait till saturday so i can see what the boostworks dyno says :ph34r:

yeah will be interesting.. What boost are u running again?

Usually it takes a good 15psi to crack 240rwkw on stock turbo's on Boostworks dyno.

260rwkw @ 15psi with cams.

Shauns dyno used to read around 10-15rwkw lower than mainlines depending on who straps it down. I'll be there on Sat but unfortunately not running. Too busy with work and cant get down to MTQ to pick up bits to fix the car. :laugh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
×
×
  • Create New...