Jump to content
SAU Community

Recommended Posts

is one better than the other?

and has anyone done a 26/30 with a Getrag hanging off it?

Hey Luke, get a price for 2 bud ;)

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

think that the S2 motor is the same as the 31 block, im sure ryan will know the exact bits tho

The series 1 VL block doesn't have any oil, coolant ports on the side of the block, nor a return point. They were all blank when they were casted. The series 2 and the R31 RB30 blocks are identical in the fact they have the Plugs in all the feed points. Km's wouldn't phase me either on these blocks as they are brilliant castings. Pulled the head off a clapped out rb30 with 440,000km on it only to find it still had original hone marks on the bores. You wouldn't go to the trouble of twincaming an rb30 without a freshen up anyway.

Edited by Ryanrb25

Wow! A lot happened on the SAU-SA soap opera today. I knew I should have set my video before going to indoor soccer.

So let me get this straight:

Cruises have finished? :O

SAU gangs have formed? ;)

Police are to be notified everytime we start our cars? :)

And everybody here has sand in their...body? :P

You all make me LOL! Thankyou. Peace.

picked up the 200 yesterday. epic fun. :P

anyone knows whats happend to that Sly GTR today? apparently had a mishap on main north rd near the ford dealership. Hope its nothing major.

yeah, saw that, saw him cruising up north east when i was headin in to pick up the 200, and then parked up and looking somewhat worse for wear not too long later near the ford dealership. mad me sad. :)

shotgun his front bar. but yeah sucks to hear, hope it isnt to bad.

wasnt much left of his front bar. took a nice hit to the front right corner.

Just took the 31 down to the boys at Aussie Dyno (& Mufflers) to get a new cannon coz i snapped mine off lol. Very helpful and polite guys! And now that im on uni holidays, time for all the other pointless crap to go in that i had just lying around ;)

RIP ... Wendy Van Gasteren

http://www.news.com.au/adelaidenow/story/0...008-910,00.html

Killed 2 years ago today at O'Halloran Hill by motorcycle colliding with a pedestrian and then traffic behind not seeing her.

Was one of the best friends, neighbour, riding buddy you could ask for.

A tragic loss to the motorcycling community in Adelaide, who co-coordinated with me a few awareness programs. Not forgotten.

Ride safe, drive safe.

;)

Edited by RubyRS4
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...