Jump to content
SAU Community

Recommended Posts

Anyone know what a reasonable ballpark figure I'd be looking at to get two stockie 32 gtr turbos converted to steel exhaust turbines...?

I can buy some blown turbos but last quote I got for a rebuild (from an anonymous source) wanted $1250 per turbo.... for that price I can possibly get a pair of proper N1's....

MTQ and ATS get mentioned a bit, I haven't called them (usually because whenever I'm thinking about turbos its night time and theyre closed)... have any of ya'll had this done? How much did it cost you?

-D

I got quoted $1k each from place in Sydney..Find that its not worth it :D

Get yourself a pair of R34 N1s :(

i was gonna bring that up dan but i knew you'd mention it..

haha thanks Ryan, just dont wanna see or hear of someone getting ripped off like i did........

if u want a responsive turbo on a gtst then go something like Ryan used to have before he upgraded but if u wanna pull over 270rwkw dont go anything smaller than a gt30/40 or a gt35/40 preferbly a external gate...a BIG hit of boost is what i prefer, well thats my opinion

Edited by ovrtym33
I got quoted $1k each from place in Sydney..Find that its not worth it :D

Get yourself a pair of R34 N1s :(

Wow 1k EACH?! Is it because of the labour involved in removing them, etc? I've heard it's pretty hard to remove/install the turbo's on a RB26 low mount setup...

Actually... I might be up for this soon. I'm still running the ceramics! Been meaning to get them steel wheeled + possibly high-flowed.

Pretty sure the seals are shot on them, too... getting the (very) occasional blue smoke under boost :D yet the engine/rings/everything else is healthy.

Although, the turbo's themselves are really only designed to last 100,000k's until they need a rebuild.

Actually... I might be up for this soon. I'm still running the ceramics! Been meaning to get them steel wheeled + possibly high-flowed.

Pretty sure the seals are shot on them, too... getting the (very) occasional blue smoke under boost :D yet the engine/rings/everything else is healthy.

Although, the turbo's themselves are really only designed to last 100,000k's until they need a rebuild.

hrm, group buy on stock 32 turbo rebuilds in south oz? could such a thing happen? I know I'm starting to get wary, those turbos are 18 years old - theres only so long that ceramics going to last before it goes byebye... and I want to boost to 18-20 psi... main thing I want tho is having it in a std housing so it'll pass regency

-D

Same boat as me, Ben. I wouldn't dare boost my current turbos... I'm so worried, I've still kept in the stock boost restriction lol.

It's not a matter of if they'll go, it's a matter of when!

Yeah. I dunno how they can charge $1200 ea when I'll have the housings already removed and give them turbos.... put them back in thru someone else.... if i get this pair of blown gtr turbos and steel wheel em, it'll be regency friendly, but i cant be stuffed paying $1200 ea when I can get 2860-7's from ISC for around that price NEW

-D

after fitting Chads -5's, you would be VERY LUCKY to be able to pick them. I personally wouldn't spend so much on refurbished standard turbos when you can sell them, and fit bolt on (although be careful, not as bolt on as they imply) garretts or 2530s etc. Much more hp potential for less $$.

Had a quick look at RB26 results: try this

18psi with high flowed steel wheels = 280 odd kws

18psi with -5s = 316kws .........

Only had a quick look - maybe there are others making more power on high flow steel wheels?? Post em up if you find them.....

Edited by Blue32
after fitting Chads -5's, you would be VERY LUCKY to be able to pick them. I personally wouldn't spend so much on refurbished standard turbos when you can sell them, and fit bolt on (although be careful, not as bolt on as they imply) garretts or 2530s etc. Much more hp potential for less $$.

+2!!

2530-5s are the goods and sames as R34 N1's Very responsive turbos and make good power

Had a quick look at RB26 results: try this

18psi with high flowed steel wheels = 280 odd kws

18psi with -5s = 316kws .........

Only had a quick look - maybe there are others making more power on high flow steel wheels?? Post em up if you find them.....

Would -7's give similar power to stock or closer to the -5 ? -5 = quicker spoolup, is that correct?

Cheers

-D

Would -7's give similar power to stock or closer to the -5 ? -5 = quicker spoolup, is that correct?

Cheers

-D

Yep -5s are still smallish turbo can handle up to 350kws and nice and responsive ( Thats what I was reccomended cause that's the power range I wanted to reach without getting LAG) I HATE LAG!!!! I was looking around for some 2nd hand R34 N1s..

I would put some drop in cams with the -5s and off you go :P

-7s are lagger but put some cams with them and it helps.

-10s are even bigger and lagger again. Same as GTRSS

Yep -5s are still smallish turbo can handle up to 350kws and nice and responsive ( Thats what I was reccomended cause that's the power range I wanted to reach without getting LAG) I HATE LAG!!!! I was looking around for some 2nd hand R34 N1s..

I would put some drop in cams with the -5s and off you go :P

Yeah I hate lag too. 350kw is bloody heaps for what I use the car for (daily) and would def get cam gears and cams.

Just depends on if I can find 34 N1's cheaper than the brand new garretts - and even then it might just be worth paying the difference to have brand new turbos... so I'm guessing -5's are what I should start saving for...

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...