Jump to content
SAU Community

Recommended Posts

Anyone know what a reasonable ballpark figure I'd be looking at to get two stockie 32 gtr turbos converted to steel exhaust turbines...?

I can buy some blown turbos but last quote I got for a rebuild (from an anonymous source) wanted $1250 per turbo.... for that price I can possibly get a pair of proper N1's....

MTQ and ATS get mentioned a bit, I haven't called them (usually because whenever I'm thinking about turbos its night time and theyre closed)... have any of ya'll had this done? How much did it cost you?

-D

I got quoted $1k each from place in Sydney..Find that its not worth it :D

Get yourself a pair of R34 N1s :(

i was gonna bring that up dan but i knew you'd mention it..

haha thanks Ryan, just dont wanna see or hear of someone getting ripped off like i did........

if u want a responsive turbo on a gtst then go something like Ryan used to have before he upgraded but if u wanna pull over 270rwkw dont go anything smaller than a gt30/40 or a gt35/40 preferbly a external gate...a BIG hit of boost is what i prefer, well thats my opinion

Edited by ovrtym33
I got quoted $1k each from place in Sydney..Find that its not worth it :D

Get yourself a pair of R34 N1s :(

Wow 1k EACH?! Is it because of the labour involved in removing them, etc? I've heard it's pretty hard to remove/install the turbo's on a RB26 low mount setup...

Actually... I might be up for this soon. I'm still running the ceramics! Been meaning to get them steel wheeled + possibly high-flowed.

Pretty sure the seals are shot on them, too... getting the (very) occasional blue smoke under boost :D yet the engine/rings/everything else is healthy.

Although, the turbo's themselves are really only designed to last 100,000k's until they need a rebuild.

Actually... I might be up for this soon. I'm still running the ceramics! Been meaning to get them steel wheeled + possibly high-flowed.

Pretty sure the seals are shot on them, too... getting the (very) occasional blue smoke under boost :D yet the engine/rings/everything else is healthy.

Although, the turbo's themselves are really only designed to last 100,000k's until they need a rebuild.

hrm, group buy on stock 32 turbo rebuilds in south oz? could such a thing happen? I know I'm starting to get wary, those turbos are 18 years old - theres only so long that ceramics going to last before it goes byebye... and I want to boost to 18-20 psi... main thing I want tho is having it in a std housing so it'll pass regency

-D

Same boat as me, Ben. I wouldn't dare boost my current turbos... I'm so worried, I've still kept in the stock boost restriction lol.

It's not a matter of if they'll go, it's a matter of when!

Yeah. I dunno how they can charge $1200 ea when I'll have the housings already removed and give them turbos.... put them back in thru someone else.... if i get this pair of blown gtr turbos and steel wheel em, it'll be regency friendly, but i cant be stuffed paying $1200 ea when I can get 2860-7's from ISC for around that price NEW

-D

after fitting Chads -5's, you would be VERY LUCKY to be able to pick them. I personally wouldn't spend so much on refurbished standard turbos when you can sell them, and fit bolt on (although be careful, not as bolt on as they imply) garretts or 2530s etc. Much more hp potential for less $$.

Had a quick look at RB26 results: try this

18psi with high flowed steel wheels = 280 odd kws

18psi with -5s = 316kws .........

Only had a quick look - maybe there are others making more power on high flow steel wheels?? Post em up if you find them.....

Edited by Blue32
after fitting Chads -5's, you would be VERY LUCKY to be able to pick them. I personally wouldn't spend so much on refurbished standard turbos when you can sell them, and fit bolt on (although be careful, not as bolt on as they imply) garretts or 2530s etc. Much more hp potential for less $$.

+2!!

2530-5s are the goods and sames as R34 N1's Very responsive turbos and make good power

Had a quick look at RB26 results: try this

18psi with high flowed steel wheels = 280 odd kws

18psi with -5s = 316kws .........

Only had a quick look - maybe there are others making more power on high flow steel wheels?? Post em up if you find them.....

Would -7's give similar power to stock or closer to the -5 ? -5 = quicker spoolup, is that correct?

Cheers

-D

Would -7's give similar power to stock or closer to the -5 ? -5 = quicker spoolup, is that correct?

Cheers

-D

Yep -5s are still smallish turbo can handle up to 350kws and nice and responsive ( Thats what I was reccomended cause that's the power range I wanted to reach without getting LAG) I HATE LAG!!!! I was looking around for some 2nd hand R34 N1s..

I would put some drop in cams with the -5s and off you go :P

-7s are lagger but put some cams with them and it helps.

-10s are even bigger and lagger again. Same as GTRSS

Yep -5s are still smallish turbo can handle up to 350kws and nice and responsive ( Thats what I was reccomended cause that's the power range I wanted to reach without getting LAG) I HATE LAG!!!! I was looking around for some 2nd hand R34 N1s..

I would put some drop in cams with the -5s and off you go :P

Yeah I hate lag too. 350kw is bloody heaps for what I use the car for (daily) and would def get cam gears and cams.

Just depends on if I can find 34 N1's cheaper than the brand new garretts - and even then it might just be worth paying the difference to have brand new turbos... so I'm guessing -5's are what I should start saving for...

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...