Jump to content
SAU Community

Recommended Posts

if it involves a pm it mustve been a fair whack.

got a clutch, now i need it fitted, recommendations/prices?

my mate shannon got his fitted by a local guy to me with a hoist in his shed, and there is also Just Jap @ jacobsen cress. they do excelent work great rates and i just had my water line replaced from the turbo with them :) from me

Thats cos you dont have a front diff sitting right under your oil filter, and you have skinny little arms :)

it would mostly be hard due to your fuel rail and plenum being right over the top

this is the cooler/relocation kit that i got (not using the relo kit cos i already have one).

HKS rip off, speedflow lines

$239

IMG_0145.jpg

Question:

Braided lines are considered defectable by the police right? So what happens if you get Pirtek to do the lines. I'm sure their standards exceed AS and therefore meet ADRs if used on motor vehicles?

:)

Reuben, I passed Regency with my oil cooler installed with Speedflow lines and Earls fittings... they didn't have a problem so long as it's mounted correctly and the lines aren't tracing all over the engine bay (ie. nice and tidy)

I'm sure Pirtek would do the lines also :)

My turbo oil line is braided from Pirtek. The water line is stock.

My auto oil cooler line is braided from Davies Craig.

My brake lines are braided from Maltech.

^^ this work exceeds stock standards so I cant see how its possible to be classed ultimately as illegal modifications

thats the thing, Ive got a massive list of mods but could only count a couple that need to be engineered. doing that atm, pretty much.

nothing wrong with getting other braided line made up by Pirtek, the only one that they can't do are the brake lines and i'm pretty sure that if you ask them they will refuse to do it anyway. If you get another place to make up brake lines and they don't put the ADR sticker on them then they are illegal and you will fail an inspection.

Here's my oil feed line the Pirtek made up;

Image539.jpg

Hence why (as radical as it is) my bike is completely ADR approved.

As much as I've been tempted to remove certain stickers for show purposes (see below), I haven't or else they are no longer approved brake lines.........they could then be anything!

DSC_0001.jpg

Don't suppose anyone's got banjo bolts for the front R33 calipers lying around, or know where I can get them (most wreckers prob won't part with them)?

Wanna fit the 4 pot calipers and ditch the 2 pot ones.

:D

try Steve at Nisswreck or Pete Hall at Jap Motorsport Roo

Thanks Pete. Was going to drop in to Nisswreck on Saturday if I have no luck with the brake mob on The Parade today. While I'm out there, I'll swing past JMS. Going to lunch shortly to do all that. :D

so ive found out that my engine in my car is from an R32 GTR V-Spec and was purchased from Autotech of all places , and had 80,000kms on it at time of being swapped into my car which in actual fact means its done over 100,000kms , never been serviced and had the speedo in the half cut wound back.

lol. yeah i heard about it around then LOL gotta love corporate email... im glad that news of important things sweeps adelaide quickly

As someone who moved here from interstate, it constantly surprises me how tiny Adelaide is - especially with stuff like this. You find out that your neighbour knows a guy you work with, or that some guy you met on the internet knows a friend of yours, or ... the list goes on .. It boggles the mind :P

Nene has some serious real estate. :P

A project I'm working on at the moment, and I found this:

NeneValley.jpg

"Nene Valley". Not far from "Blackfellows Caves"! :P

Ah ... back to work.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...