Jump to content
SAU Community

Recommended Posts

anyone know whats happening around South rd/cross rd. Got a 7news chopper in the sky just wondering around.

EDIT: dont worry, burst water main in the middle of the rd has blown a hole in the rd lol

just came thru there coming back from Damos, 5 biker cops with laser, pulling up people for speeding over 25, had all of them looking at me like fresh meat in a lions cage, not speeding but arms length from my car with damos old front bar occupying the pass seat and back seat lol... made it thru the cage unmolested, heart was racing out of my chest, thought for sure I was done..lol

oh and it looks like they will have the road fixed up for rush hour in am, blew a hole near the caltex food mart south bound side

thanks again damo , your rims are pure porn mate :ermm:

Hey guys, I was wondering if anyone can explain to me the process of "importing" a car from interstate? Thanks in advance :ermm:

i got my 34 from interstate

fresh from japan...went to melb.....the guy did all the complaince work over there.........drive her over to adelaide.......went to regency for full check......passed.......went and got her registered lol

Heres a brain teaser - problem with my daily:

Its a 1981 Toyota Corona CS

- cold start it struggles to stay on

- accelerator to the floor just to get it to idle - otherwise it would conk out if I let go

- idle while doing the above isnt stable - like its surging - sometime it conks out and have to repeat the above

- after a minute, it must of warmed up, it idles fine without accelerating

- chuck it into gear there is a high probability of it conking out and having to repeat everything above - but it doesnt take as long as when turning it on the first time

- first couple minutes of driving, accelerator is down to the floor and the car is just putting along at walking pace then it gains enough power and revs normal and is all good

Its about a 5 minute battle to keep it on every morning lol

- recently started happening when the other week the car just wouldnt start, before that the car started first time everytime and drove fine, after that day that it wouldnt turn on its been problematic ever since

- to get the car going again the points in the distributor was replaced, alternator replaced and a new battery but somehow the problem mentioned above arises

Anyone got suggestions on what could be wrong?

got the wheels on the Keto.

was lucky enough to get a really helpfull guy in repco, that sourced some wheel nuts that are nissan shape, but have toyota thread (even security nuts!)

pls ignore how filthy the old girl is... im busy saving the murray

IMG_0210.jpg

Heres a brain teaser - problem with my daily:

Its a 1981 Toyota Corona CS

- cold start it struggles to stay on

- accelerator to the floor just to get it to idle - otherwise it would conk out if I let go

- idle while doing the above isnt stable - like its surging - sometime it conks out and have to repeat the above

- after a minute, it must of warmed up, it idles fine without accelerating

- chuck it into gear there is a high probability of it conking out and having to repeat everything above - but it doesnt take as long as when turning it on the first time

- first couple minutes of driving, accelerator is down to the floor and the car is just putting along at walking pace then it gains enough power and revs normal and is all good

Its about a 5 minute battle to keep it on every morning lol

- recently started happening when the other week the car just wouldnt start, before that the car started first time everytime and drove fine, after that day that it wouldnt turn on its been problematic ever since

- to get the car going again the points in the distributor was replaced, alternator replaced and a new battery but somehow the problem mentioned above arises

Anyone got suggestions on what could be wrong?

I take it its a carbie ?, the choke is stuck, the idle circuit it dirty, air filter dirty? dirty PCV ?, vacuum leaks from dizzy to manifold, carbie vacuum advance ?

get some carb cleaning and hose it down with a fast idle after it warms up, problem solvered if its carbie, and carb doesnt need rebuild

Edited by sapphiregraphics
If anyone is interested here are some of my new tracks.

Made from scratch. no samples at all.

some weird electronic stuff. deep house. progressive. dark etc

new_house.mp3

ooh_ooh_ahh_ahh__remix1_.mp3

chocolate_chip_shit.mp3

listening too now not bad

what you use to make them

I take it its a carbie ?, the choke is stuck, the idle circuit it dirty, air filter dirty? dirty PCV ?, vacuum leaks from dizzy to manifold, carbie vacuum advance ?

get some carb cleaning and hose it down with a fast idle after it warms up, problem solvered if its carbie, and carb doesnt need rebuild

Yeap its carby, just googled it up and I reckon carby cleaner sounds like a plan - will give that a try tomorrow. Cheers :D wish the R33 was as simple and cheap to rectify problems lol

[20:31] Dohmar: http://www.smouch.net/lol/

[20:31] Cara: what is it

[20:31] Dohmar: funny site

[20:32] Dohmar: Never gonna give u uuuuuuuuup

[20:32] Dohmar: Never gonna let u dowwwwn

[20:32] Dohmar: Never gonna tuuuuuurrrrn arouuuuunnd and

[20:32] Dohmar: deserrrrt youuuuuu

[20:32] Cara: f**k U BEN

[20:32] Dohmar: rofl

>:D

-D

ahaha, much love for the rick roll, well played sir.

Yeap its carby, just googled it up and I reckon carby cleaner sounds like a plan - will give that a try tomorrow. Cheers :D wish the R33 was as simple and cheap to rectify problems lol

bet the throttle body is black inside, but should be kinda bronze coloured. just warm up the engine, after taking the air cleaner lid off, hold it at about 2k rpm and spray inside the throat of carbie, motor will try to stall, stop spraying for a min, then repeat till clean, whats left of carbie cleaner wash off the outside of carbie.

and pcv valve and put it back in. after it cools off, look to see if the plate in carb is free, top one is choke. the little holes are the vents to float bowl, and idle curcuit, if you see raw fuel pouring/sputtering out of vents in carb, you have other problems in carb.

also can be a bad electric choke?

check vacuum line to dizzy advance, plugged in?

hope that helps mate :D

safety note, do not put your face over carbie, if it backfires, you will get a face full of fire

Edited by sapphiregraphics
Awesome! just what i wanted to here after installing them in my car :D

lol, this cop was a cock to be polite about it

goin to fix it tomorrow after work, went for a drive about 8:30 down to caltex at st marys. sitting at the sturt / south rd lights, get a tap on my left window

same cop

"so, you've still got those blue lights in hey"

"ermm, ive got until friday to fix it" *casual grin on my face*

"oh...........................................................okay then" *flips his visor back down

LOL

listening too now not bad

what you use to make them

Mainly use fruity loops studio8 producer edition.

Editing is usually done with sony soundforge.

couple other smaller programs too.

its annoying because I cant upload any longer songs. or songs with more detail as they are more than 10mb.

CD will be made soon tho

lol, this cop was a cock to be polite about it

goin to fix it tomorrow after work, went for a drive about 8:30 down to caltex at st marys. sitting at the sturt / south rd lights, get a tap on my left window

same cop

"so, you've still got those blue lights in hey"

"ermm, ive got until friday to fix it" *casual grin on my face*

"oh...........................................................okay then" *flips his visor back down

LOL

guess you went past the same cops as me,,,, lol a few min from me,, arms length,,told ya so

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...