Jump to content
SAU Community

Recommended Posts

nero is the problem, even tried burning through windows, still = fail

hahah >insert witty quote about redheads and burners<

sorry but how is nero the problem?

If the burn fails during the procedure, your burner might be faulty.

If you can't even get the file into a filesystem template and prepare the image, then give up and hire a nerd for half an hour. Then sell your PC and buy an abacus.

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

A rebuilt high flow i would of thought would be better than a 2871

52T 2871 will do 250rwkw and a 56T will do 270rwkw, i don't see a high flow doing that. Garret rate them at 460 and 475 hp at the engine respectively.

Edited by D_Stirls
Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

Wow.... I guess they couldn't have been true port supporters

after all, you didn't mention that they'd stolen your car radio :D

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

cut metal parcel shelf........you'll be lucky not to get black listed for that (as the parcel shelf is usually part of the structural steel

might be worth checking out what nisswreck can do for you though

heres the question scott, how did you not know your headlight was out? i can pick it on any car i drive (especially at night).........and i woulda checked all my lights before going anywhere near regency anyway

Dammjust got back from my regency appointment and failed :D .

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

are you kidding me for 6x9's ???? that means you could defect a lot of cars in this town. I dont care for 6x9's but that is petty shite , its going to be expensive to fix labour wise unless you can weld, rear window might have to come out just to keep from breaking it ,, that sux big time

try a body shop for install if you dont want to attempt it

anyone have about 20-30cm or so of 3M automotive double sided tape laying around? The tough stuff they use to stick on car trims, etc. NEED some.

superchump doesnt sell the good stuff, not the one down south anyway

you need the red 3M tape , used for trim, call up any auto paint store for it, or rare spares on south rd

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...