Jump to content
SAU Community

Recommended Posts

i could do that eventually but atm i would rather get the stock gtt engine in and go from there too cause i can use the head off the N/A engine for the 25/30 combo

so are you putting a GTT engine in, and building the 25 N/A head with 30 bottom end?

I wanna do a 25/30 build too. Lets do it together Cara :P

Would like: RB30 bottom end, RB25 top end, cams, cam gears, top mount manifold, HKS 3071 ... as a starting point.

But which car to put it in :)

I wanna do a 25/30 build too. Lets do it together Cara :P

Would like: RB30 bottom end, RB25 top end, cams, cam gears, top mount manifold, HKS 3071 ... as a starting point.

But which car to put it in :)

morris oxford...power to weight like strapping a jet to a skateboard

Cara,

You should have a look at the lewis engines website as it has got me thinking right now.

www.lewisengines.com.au

here you go Cara, from their website:

TRUST TDO6 used two hours after rebuild. made 340rwkw on rb25 @20psi. $800.00

RB30/25 'TORQUE MONSTER' engines $6,900.00

2vts8iq.jpg

Dis wat u want??

looks the goods :P

I wanna do a 25/30 build too. Lets do it together Cara :)

Would like: RB30 bottom end, RB25 top end, cams, cam gears, top mount manifold, HKS 3071 ... as a starting point.

But which car to put it in :P

sounds like a good idea ruby :D cant wait lol :P

here you go Cara, from their website:

TRUST TDO6 used two hours after rebuild. made 340rwkw on rb25 @20psi. $800.00

RB30/25 'TORQUE MONSTER' engines $6,900.00

might have to check that out a bit more damo, cheers

oh

btw

what do you think would be better?

apexi power fc boost control kit (for about $730) or greddy profec b spec II boost controller (for about $579)

let us discuss.

:P

Nengun has the pfc boost control for around 470 delivered? I guarantee Luke ENR can get it cheaper too... Both are fine, just depends if you want another device in your cabin or not i guess.

Thinking of building a little project myself ...

RB20 block

RB25 crank

RB26 rods

Forged pistons (1mm oversize)

Ported head

Adjustable cam gears

Custom cams

Top mount manifold

HKS 3071 turbo

... for starters!

Want car to put it in? :P

cara is like a little boy that listens to backstreet boys, while wanking off to a picture of britney.....doesnt know what she wants.

thats my take on it anyway.

now, my LAST attempt to get this footage from sat night up on you tube, if it doesnt work, im gonna give up!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...