Jump to content
SAU Community

Recommended Posts

I think I am leaning more towards PSI... ...

Think I've picked up a profec B II so I won't need a gauge really as you would hope a EBC will hold perfect boost everytime lol, and I am not mounting it on the dash... Hiding it in the glovebox me thinks

Wayne you will find that the Profec B Spec II needs to be tuned properly otherwise it can cause spikes.....you can always have a gauge to monitor whats happening

I hate tacky sh!t in car interiors, no where decent to mount a gauge in a GTR other then the steering collum without it looking sh!thouse even then it doesn't look that good... :) Argh

thats why they mount them on the bonnet, nooo that looks tacky to. theres a decent mounting point over the a/c. just rip out the old 1s there :laugh:

anyone got a garage out the stix i can start storing random 260c's i find for sale for a later rebuild operation :laugh:

spotted this, no electric windows or psteering though.

http://ozdat.com/forum/viewtopic.php?f=24&t=18132

Edited by Inline 6
Rego went up in price... very nice. 3 months is now $196 / 12 months is $735....

living in the country does have it benefits $154 per 3 months :laugh: :laugh: :laugh:

hey guys,

the names daniel and im new to SAU.

i have owned an r34 gtt for about a year with my missus so i have decided that its about time i joined up here.

just thought that this would be the best place to introduce myself to the other SA users.

also i need to get my posts up before i can PM :P

welcome :D

if your interested in entrering shows and stuff im the SAU:SA Events Coordinator :D

hehe stupid bank

i called to cancel a monthly direct debit to a charity.

the charge to do so was $15!! ffs

then she proceeded to tell me that i have been conditionally approved for a credit card up to 8g and asked if

i was interested, my reply '' if you waive that $15 fee ill consider it''

she did too haha stupid peanut, i dont want no credit card hehe f*k em

thats why they mount them on the bonnet, nooo that looks tacky to. theres a decent mounting point over the a/c. just rip out the old 1s there :pirate:

anyone got a garage out the stix i can start storing random 260c's i find for sale for a later rebuild operation :)

spotted this, no electric windows or psteering though.

http://ozdat.com/forum/viewtopic.php?f=24&t=18132

No way am I molestering a GTR by removing the factory gauges... And krishy the std gauge is already almost maxed out with the amount of boost I am running atm so when I am running anymore boost the std gauge wont be of any help aha :)

No way am I molestering a GTR by removing the factory gauges... And krishy the std gauge is already almost maxed out with the amount of boost I am running atm so when I am running anymore boost the std gauge wont be of any help aha :pirate:

You could possibly consider what I did, buy an aftermarket oil pressure and turbo in psi gauge and mount them where the GTR clock is (lets face it, who the frig needs a clock?)

DSC00251.JPG

which is what they look like at night, here is a wider shot - i chose VDO gauges since they look similar to the standard gauges in regards to color, font and font size;

DSC00253.JPG

Which is the wider angle and then this is a daytime shot (before fitting gauges)

dashnobubble.jpg

one gauge removed already and the other one still connected. benefit of having the gauges mounted there are that theyre totally legal and dont require you to sacrifice an aircon vent (i did have a water pressure gauge mounted in the right hand aircon vent but i removed it because a) it was broken and b) this is australia thanku, i need my damn ac..)

Or, you could mount extra gauges in the glovebox :)

-D

i'll be drawing up a plan on friday as per my dash space (incorporating a larger switch panel as well) so will knock it into digital form then

also depends on how rugged u need it to be - you're gonna be using ur 31 for strictly track work eh? means u can probably get rid of the majority of your centre console and fit a 3x3 gauge display, fit it and the entire dash in red led's

or you can have the glovebox with everything that would be relevant to a copilot/tuner and just have the fundamentals for the driver to worry about. or you could drill loads of holes in the dash to fit as many gauges as you need

but then again, if you're racing, some of the a pillar gauges arent too bad, and you can mount gauges to the sides of the console in most cases without creating too much of a crash hazard..

depends on if u want it legal or not >:pirate:

-D

also depends on how rugged u need it to be - you're gonna be using ur 31 for strictly track work eh? means u can probably get rid of the majority of your centre console and fit a 3x3 gauge display, fit it and the entire dash in red led's

or you can have the glovebox with everything that would be relevant to a copilot/tuner and just have the fundamentals for the driver to worry about. or you could drill loads of holes in the dash to fit as many gauges as you need

but then again, if you're racing, some of the a pillar gauges arent too bad, and you can mount gauges to the sides of the console in most cases without creating too much of a crash hazard..

depends on if u want it legal or not >:)

-D

strictly track only. there's not going to be any heater controls / vents / stereo / etc. Got an RSM, now just need to get a heap of gauges that are the same and can give me the info i need (Boost, Oil Press, Oil Temp, Water Temp, Volts, Fuel level (for the cell, thats if i can put a sender in there somehow). Maybe a med sized tach, got the RSM giving me speed/tach for now anyway

strictly track only. there's not going to be any heater controls / vents / stereo / etc. Got an RSM, now just need to get a heap of gauges that are the same and can give me the info i need (Boost, Oil Press, Oil Temp, Water Temp, Volts, Fuel level (for the cell, thats if i can put a sender in there somehow). Maybe a med sized tach, got the RSM giving me speed/tach for now anyway

If you're going racecar 100%, get mechanical gauges and mount them where theyre most visible to you. Some would argue electronic are best but I prefer to have each gauge as independant as possible, and preferably to not rely on the electrical system.

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...