Jump to content
SAU Community

Recommended Posts

could certainly give u feedback if u like :) email me ur schematics dude

-D

haha need someone handy will a solderin iron and wood / plastic work? :)

I Recomend VDO gauges too, they make a series of gagues in different designs an layouts for pritty much anything.

Anyone know how i would go to wire up 2 switches. One for the rear demister and one for the front window fan?

Just test the loom while turning one at a time off and on again until you find the wires you want. ether that for get a schematic and look through that.

Edited by Jack88
haha need someone handy will a solderin iron and wood / plastic work? :)

I Recomend VDO gauges too, they make a series of gagues in different designs an layouts for pritty much anything.

I can highly recommend jack for solder jockey work ;D (after all Im shit at it and made him do it all)

My dick is still bigger than his tho yall

-D

as above i cant pm for some reason cara, tried to earlier for you too and couldnt.

so ill put it here, Kye Hansen 230-250rwkw? im only guessing haha

ok thanks for that dude :)

i might be getting Saber gauges depending on the price :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...