Jump to content
SAU Community

Recommended Posts

Good luck with that turbo Abe, i've just been recommended a 3076 with .6 rear. Reckons it'll be good for 280rwkw!

Got off the phone to hypergear and he said that would be enough to go about 320rwkw or so....for something like 260-280 he recommended a AT28G2 or something similar to a GT2871R for response and good hard hitting power

Pretty sure the XR6t rears are a 1.06 housing, being a 4ltr motor. I'd be dropping it to a .83 or .6, depending on how you want response to be

Response even from a 0.83 will be laggy as f**k considering the stock ones are 0.48 or something

dont quote me on those figures Dave.....thats what i have just been told so.....not my own findings and i have f**k all clue when it comes to turbos but others that know there shit will know the figures around it.....

Yeah Simon @ Morpowa said it would be pretty crazy, but with the smaller .6 rear response wont be too bad! Wish i had of grabbed the one in the for sale thread. Pump and injectors for me first i think.

Hmmmm and they're on my shopping list too Dale!

On a brighter note, got some cf eyebrows off ebay. Picked them up and both are cracked! Seller is sending 2 more out tomorrow and i get to keep the fecked ones! :)

Edited by Jamesrb25
youre gonna have fun with that turbo on a 2.5...

Woot, thats what i was aiming for.

Good luck with that turbo Abe, i've just been recommended a 3076 with .6 rear. Reckons it'll be good for 280rwkw!

Thanks, ill let you know how i go with this.

is that a 1.06 rear housing Abe?

No, its a .8X (its a 0.8 something)

and run an external gate*. that pissy little internal has trouble coping.

*with a big f**k off screamer pipe.

As much as i would like to, no. It going on my daily.

well, external gate is going to be a minimum. seriously. that tiny little internal gate has trouble properly handling the boost.

*correction, smaller turbine housing, might just get away with it.

Edited by scandyflick
Yeah Simon @ Morpowa said it would be pretty crazy, but with the smaller .6 rear response wont be too bad! Wish i had of grabbed the one in the for sale thread. Pump and injectors for me first i think.

Hmmmm and they're on my shopping list too Dale!

On a brighter note, got some cf eyebrows off ebay. Picked them up and both are cracked! Seller is sending 2 more out tomorrow and i get to keep the fecked ones! :)

i got the same ones i reckon.. on didnt fit, and cracked, got new one, sent the wrong one, got new one, still didnt fit right.. cbf afterwards.

there shit!

Yeah, i just picked mine up, hoped on the for sale and saw the same turbo for $1800, i could have saved money....oh well.

The turbo i got is running a 12psi actuator, and according to my research - browsing here and looking at Lithium, Mafia, and Cube's posts, they recommend the 0.8 rear housing. They also said that there is boost control issues, but that only really happens with the non genuine Garrett housings. The rear housing on mine says Garrett, and has 0.8 stamped in the exhaust input :S

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...