Jump to content
SAU Community

Recommended Posts

When i had my car at tilbrooks (back when they were open) my car was securely parked and keys properly locked away....now thats professionalism

:happy: My car always had the keys in it when it was there.

This has been taken from NS please read and send off the email :happy:

Here is the youtube link

http://www.youtube.com/watch?v=oGT3rAi_pLw

Hi all

Well Well Well........a half decent story on ACA!!!!!!! Lets not turn it into a shit fight....but needless to say there are alot of people in this thread eating massive huge gobfulls of humble pie after stating the story would be shit, incorrect, poorly reasearched and do more harm then good. I'd say we had a win tonight.....maybe a small one...but a win none the less.....and if the problem and solution (a new track) stays in the media.......I'll happily be called a Hoon for the rest of my life! That story showed us responsible 'hoons' out at Mallala having fun, messing around with cars and in some cases....CRASHING!

BWHAHAHHAHAHHAHAHHAHHAHAHHAHA.....I remember when that side of your car was straight Stewart......Oh and my sign is missing you bitch!

Now.....where too from here I hear you ask....email Rann etc......WRONG! That idiot has had his time......leave him out of the 'go zone' for a public project like a new track....that way he keeps his grubby mitts off the adulation and public support when it's done. You need to look slightly to the left!

Ladies and Gentlemen....your mission if you choose to accept it is to bring a few new players into the ring....players who can pressure the current Government like we can not.....like the so called Consortium can't. The players I refer too is as follows;

post-59669-1250142135_thumb.jpg

Isobel Redmond - Leader of the Opposition (Liberal)

Contact details;

10/14 Druids Avenue

Stirling SA 5152

(08) 8339 5077

(08) 8339 6817

[email protected]

post-59669-1250142168_thumb.jpg

Steven Griffiths Deputy Leader of the Opposition (Liberal)

Shadow Minister for:

Shadow Treasurer

Shadow Minister for Federal/State Relations

Shadow Minister for Government Enterprises

Contact;

51 Robert Street

MAITLAND SA 5573

email: [email protected]

*NOTE - HAVE LOOK AT WHAT THE DEPUTY LOOKS AFTER!!!!! MONEY AND GOVERNEMENT INTATIVES......WHICH = A NEW FACILITY!!!!!!!

Your email to cut and past is as follows;

Dear Isobel and Steven,

I watched with pleasure at the A Current Affair segment covering 'Hoon Driving' compiled by Kelly Klappis which aired on Channel 9 6:30pm Tuesday 4/8/09. This story adequately represented the REAL problem on our street, and highlighted the immense ommision the current Rann Government is overlooking when tackling the problem of street racing and related deaths on our streets.

You may not know, but Adelaide is desperately needing a legal, readily accessable off street racing facility. We celebrate Clipsal 500, we applaude the Classic Adelaide....but for nearly 10 years the nearest tangible facility to legally drive in a spirited manner is some 1 hour north of the city at Mallala. Adelaide International Raceway has ceased mainstream public opportunities for 10 years, and the nearest CAMS sanctioned drag strip is over 7 hours away in Victoria.

An independant Adelaide consortium has 25 million dollars waiting to construct a new multi-motorsport facility, but talks with the Rann Governement over land allocation have stalled/ceased. The Rann Governement has openly stated it will not support the construction of a new facility, denying the consortium the ability to offer an alternative avenue to street racers....denying the opportunity to assit in reducing the South Australian road toll. The Rann Governement would rather fine, crush and penalise modified vehicle owners. If a new venue saved one life.......this would be worth more than 1000 crushed cars, or millions of dollars in speed camera revenue.

As the Opposition, please investigate these claims, please action the publics desire for a new venue. The automotive industry in SA is massive, and like a big River Gum tree, it's roots and branches spread far and wide. You can be assured a public show of support from the Liberal Party on this matter will generate not only support for your party....but a huge voter swing come election time in 2010.

As much as the Rann Government deny it, the hoon problem on our streets is a POLITICAL ISSUE, and a new venue is a viable way to help reduce the problem. Support us......and we will support you.

Yours truly

Turn the tide against those that refuse to recognise and support a realistic problem.....cut, past and send this email to the above addresses and do you part.

I stood up and did my bit, and will continue too any any opportunity. Now's your chance!

RJ

Thats a pretty good idea, email the other side of the fence, Mike Rann does not want YOUR votes.... he will not listen to what WE want... so bring new players into this game and see how we go...

Edited by AXTX

does anyone know any half decent cheap brake pads?

need to replace the ones on the 33 but i dont want some crazy shit as the silvia needs a few more things first

cheers

Edited by Import S13
does anyone know any half decent cheap brake pads?

need to replace the ones on the 33 but i dont want some crazy shit as the silvia needs a few more things first

cheers

Lucas and QFM are cheap and good.

Lucas and QFM are cheap and good.

Got QFM in the wrx now very good pad, not dusty little bit squeely when cold but after normal stop there fine...Good bang for buck.

On a 2nd note just been told there closing my work down, rolling closure over next month or so..f**k :whistling:

I highly doubt that such a statistic would be available Steve, but never the less, as I always say and as 'racin jason' has also stated in his formal letter, if a race track saves just one life, then it was all worth it.......just ask the parent's of that teenager that lives to see his own children.

i read a good article in Boost Magazine supporting the new motorsport infrastructure, and the writer mentioned the decrease of "hooning" in the area when WSID was built. Surely there is some sort of positive and definite info floating around that the consortium can use?

This email is directed at anyone who has played a part in slowly killing South Australian motor sport, and in turn increased those that tragically lose their lives every year on South Australian roads.

As a voter, I would like to voice my opinion and state that Mike Rann will not be getting my vote unless he wakes up to the demands of so many and provides car enthusiasts with the facility to enjoy their hobbies.... Read More

I am not alone.

A disgruntled voter,

[iNSERT NAME HERE]

please send this too..

[email protected]

and

[email protected]

Are there statistics anywhere that prove young lives are saved where there's a facility to take it to the track?

Are there statistics anywhere that prove young lives are saved where there's a facility to take it to the track?

Are there statistics to prove that economies improve with extended tramlines?

Are there statistics to prove that people are healthier with a new hospital development?

Are there statistics to prove that speed cameras have indeed saved lives?

The government went ahead with spending money in these areas, with no proof. Why do we need to prove we need a motorsport complex? The public is screaming for one. And the government doesn't need to spend a cent! :whistling:

CNNEL 9 has the report ACA did on drifting at G1.... lets see what they twist!
great last ending words... government doesnt think it will help and will not invest! WANKERS!

They started off with a commy doing a burnout (negative)....saying hoons doing their hooning legally....since when did we became hoons if we are out on the track???? (negative)......and those last words "the govt claims there is no stat on a track decreasing fatality on the streets" now how many commy's, falcooon's, mesoshitty's, camry's on the street are involved in crashes day in and day out....doubt they will be the one going on the track.....but where do the people (minority) take their performance vehicles to test it out etc (very negative)

So apart from a few positive points made by the people being interviewed there wasnt much positive in that story.....oh and showing a car doing a burnout not even in oz i mean seriously WTF

Lucas and QFM are cheap and good.

Lucas i am using them and absolutely loving it.....similar to QFM's they are cheap, not mega brake dust and stops when you need it to lol

I'm not stating that we need to prove this state needs a race track, merely a serious question asking are there statistics that show it clearly. Was not a piss take!

yeah no probz, I understood the manner in which it was given and I don't think Ruby was having a flame :whistling:

awesome

havent slept for a few days (knee pain), last night midnight when for a run thru the Hills

wow. insane 3rd gear awd power wheelspin.

also fog in higher areas was so thick couldnt see more than 10m in front.

still, had a nice test run, boosts so hard all the way thru.... such an awesome turbo/cam combo

well, the 200 is finally running again. its f**kin awesome. pulls harder at 10psi than it ever did at 15 psi. its rad.

so pulling harder while squeezing less, feels like you can get to where your going faster....lol

sorry, setup again.

good on ya dave, just dont blow it up now...lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...