Jump to content
SAU Community

Recommended Posts

dale, where did u get your catch can made?

want a setup similar to yours.. with the breather etc..

cheers

It's just a Greddy copy can that i got off eBay for $45. i added the filter though, i just drilled and tapped a hole then used a -8 barbed fitting and a filter that i got from Autobahn for $8. If you do the same though make sure you use a -10 size fitting as the filter is to small on mine and when i put the car back together i'll be making it bigger.

I have to make up the brackets to hold the can as well.

dale, where did u get your catch can made?

want a setup similar to yours.. with the breather etc..

cheers

yo, head down to see niko at smooth.

he made me a perfect catch can for my ca in the drift car.

big and user friendly and didnt cost much at all and they fitted it up with new lines since my old one was too small.

Took some pics of the new toy yesterday .... pity it was raining and filthed it up before the photos (despite it being washed 2 hours earlier :) )

Fave photo

Very nice - I've seen a few people use that one - where is it at?

I'm having injector issues AGAIN. 3 weeks after replacing 2, another 2 (not replaced) have started leaking. pissed off

and i called main north nissan. OEM nissan 444cc injector = $437 EACH!!!!1one... and then I find a place in japan that can post me a set of Nismo 600cc's for $990. Geee, whatever shall I do? :happy:

Just sucks - have to drive the car as little as possible in the meantime. *grumble* already the car is going in this weekend to get the spoilers and bumpers painted, couple dents removed, the rear bumper reo fixed from last sundays rear-end accident, calipers and hubs powdercoated and the oil relocation kit relocated (its in a really daft place atm, very low to the ground - good for capacity but not great when you go to park and have a concrete bollard hit the oil filter...)

-D

and i called main north nissan. OEM nissan 444cc injector = $437 EACH!!!!1one... and then I find a place in japan that can post me a set of Nismo 600cc's for $990. Geee, whatever shall I do? :happy:

-D

Get a set of 570, 660 or 750's off these guy for $780. And they're in Australia.

http://www.injectorsonline.com/indivprod.p...=74&scid=12

Edited by D_Stirls
just go for a 3071R Matty, very similar compressor but already fitted with the T3 rear.

3071R wont have the responsiveness i want though (its going on a basically stock internaled RB20). I mean, we could make the new mani with a T25 flange, but that stuffs me for future upgrades

*edit*

Abe, 3076R is worse for me lol

Edited by Matty 31
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
    • Did you hit up the search function? R33 and greddy and cable returns this thread with some options.   https://www.sau.com.au/forums/topic/358214-rb25-throttle-body/
    • Thanks buddy.. the standard one needs to be about another inch or inch and a half longer. Thanks anyway
×
×
  • Create New...