Jump to content
SAU Community

Recommended Posts

I would be quite careful pissing people off in perth m8. Theres some Crazy farkers there. Not sure how long you lived there. I grew up in Girraween myself. Rough neighborhood. Rough city.

Although I aint been back to perth for yonks, so dunno what its like now.

Edited by silverbulletR33
I would be quite careful pissing people off in perth m8. Theres some Crazy farkers there. Not sure how long you lived there. I grew up in Girraween myself. Rough neighborhood. Rough city.

Although I aint been back to perth for yonks, so dunno what its like now.

*tumble weed rolls past*

Perth? well its like the wild west

there has been 3 shoot outs here this morning already.

We keep shot guns in reach all the time

the one and only time i have been in an "out of car" road rage experiance, the guy came running up to me all ready to go, and when i got out of my car (@ 6'5" 100 kgs) he just really quickly said "dont worry" turned, walked real quickly back to his car and drove off. i think i laughed for about 2 minutes before i could drive the car again!

the one and only time i have been in an "out of car" road rage experiance, the guy came running up to me all ready to go, and when i got out of my car (@ 6'5" 100 kgs) he just really quickly said "dont worry" turned, walked real quickly back to his car and drove off. i think i laughed for about 2 minutes before i could drive the car again!

What a pussy eh.?

Only road rage I've had was with a biker who managed to try & kick my mirror off, but I followed him & didn't back down even though he was ready to have a go at me...he did f**k all & he was in the wrong anyway.

My brother had a bunky excel that one day was being pretty ghey, so taking off from the lights it took him forever to build speed up. There was a guy behind him who must of been pretty pissed off about it, and came up in the emergency lane swinging a spanner/wrench at his car. Managed to put a decent dent in the back too. Got up to some more lights, my brother seen he was a few cars up. So he jumps out, jogs up to the car, he still had his window down & he cracked him right in the face for it. Dude got a probable broken nose but was pretty bloody for it, so the road rage instigator doesn't always get proven right

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...