Jump to content
SAU Community

Recommended Posts

This is exactly what is going to happen. Police WILL be inside the park but they will be working WITH us. This is what we are trying to achieve so the innocent don't get raped.

Raped is such a harsh word, think of it more as suprise sex

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

This is exactly what is going to happen. Police WILL be inside the park but they will be working WITH us. This is what we are trying to achieve so the innocent don't get raped.

Yeah, I see what your saying and understand what the goal is. But this is just Aspley Maccas all over again, about 3 years ago the police and McDonalds agreed that people could meet in the carpark. A few weeks/months went by then after time the police lost intrest in being there, then it turned into a skid fest. A few weeks of this occured then the polcie are back but shutting down the carpark to do a car by car search and handing out tickets like candy. It only takes a few bad apples and your up shit creek again trying to find a new place to hang...

Like i said, I hope it works I really do. But I doubt it will. Something about "history repeating" rings a bell...

Raped is such a harsh word, think of it more as suprise sex

:)

Thats a good one...

Raped is such a harsh word, think of it more as suprise sex

AHAHAHA That does make it more romantic :P

We will do our best for the cruise scene and hopefully it all works out for both parties involved.

Remember we are looking to use the carpark for the first time on Thursday 1st November. But we need your support at the meeting with regards to what you guys need or want to be organised for the park.

MEETING -

ZILLMERE PCYC

340 Zillmere Road

7.00pm Tuesday 23rd October

SCOOBA STEEEEEEEB

I like what i've read, good work :D Hope to be out there soonskies to catch up

Cheers, Anna xo

You better come or I will lock Nikita in a cupboard for you never to see her again MWahahahaha. :P

i will be avoiding this like the plague

anywhere cars gather, with a high likely hood of a number of defects being in the same area at teh same time, the cops will not be far off;

regardless of whether or not the owners of the properties dont mind the cars being there;

defects are defects;

It is very simple dont have a car that has got defects and you wont have a problem!

exactly. if its plated and has the papers IN THE CAR to back up the plate - what is your worry??

that said I'll probably venture down in the corolla first before driving my subaru wagon down there. last time I was at aspley I got a strange look (driving the starlet) so I never went back. :worship:

an off trivia point. why was BWCP set up? the organisers didn't want the dickheads out with them when they were street racing.. (yes that was the true reason.)

I see what you are doing and if you pull it off cleanly great. bearing in mind that magnesium dr (crestmead) was another spot that lots of people gathered at and it was blocked off plenty of times and canaries handed out. (I was there a few of them and managed NOT to get one.)

another case we had back in 2002 was this: we orgainsed a 15 car cruise and set a meeting point at yatala. when we left I had to kick another 10 cars OFF the tail of us (we were all on two way radios.) out front of said meeting place before we could continue on. the police sat beside us the whole way to NSW despite us hoppping on the radio and telling them we were doing nothing wrong. (we were doing a byron run for sun up photos.) they marked us with two unmarked cars watching us the entire way thinking we were going to race. we were out for a nice under the limit drive to watch the sun come up in byron and nothing else.

as been said its the twits that spoil it. get rid of those and it works.

bearing in mind that magnesium dr (crestmead) was another spot that lots of people gathered at and it was blocked off plenty of times and canaries handed out. (I was there a few of them and managed NOT to get one.)

Yeah i even got a call one sunday morning from browns plains police accusing me of doing burnouts down there which i wasnt (was in a N13 Exa) i was there but parked and watched. since then my involvement in the car scene has been fairly limited.

likewise. I go out occasionally but thats it.

that said - who's going to clean the mess up that is left when everyone leaves. aspley parking lot is atrocious after everyone leaves.

car scene died a long long time ago, i use to venture to aspley mcdonalds for a look now and then, but got over it. it now seems to be all preteen school idiots or old guys trying to relive the 70's

good luck with it mate, hope it doesnt go sour.

EDIT

No Meeting will be held tomorrow night 23rd October 2007 at PCYC Zillmere. All systems go! There will definately be a meet Thursday, November 1st at the Toombul carpark. So see you all there! And I stress, please don't bring any wankers, because if all goes well, this will definately be an ongoing event for Thursday night cruisers. If you have Any ideas or suggestions with regards to the night, for the future, then feel free to let us know ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...