Jump to content
SAU Community

Recommended Posts

When I got my R33, it came with a heap of std bits and peices [which I sold off].

One of the boxes was for a Nismo Selective LSD Part No. 38420-RS200 [i kept the box].

1. What I want to know, is this a 1.5 or 2 way diff centre? [What I read on the www was some Nismo units could be either depending on how you set them up].

2. Is it a mechanical diff?

3. How tough is it?

All I know is that it hasn't broken yet, it loads up both wheels every time [corners and acceleration], it clunks and skips in corners, and when you have it on the hoist and spin the back wheels, they both rotate in the same direction.

If anyone can info me up or give me a link I'd appreciate it. I basically want to know what I have.

Link to comment
https://www.sau.com.au/forums/topic/189181-nismo-selective-lsd-diff/
Share on other sites

Could only find 2 references to this part # 38420-RS200 and also 38420-RS201 (in japanese) , mentions it is a selective model, no mention of 1.5 or 2, looks like they were available in both.

Also have a read of this

http://classiczcars.com/forums/showthread.php?t=8305

http://www.poweraxel.com/nismo/news/news2000/n000040.html

Looks like it is an old short lived model, perhaps a Nissan dealer could look up the part # or someone with an old Nismo catalogue.

Edited by chook

Yeah, what I found was that you could do something to it and make it a 1.5 or a 2. From what I understand, you could do this any time you wanted [as long as you have a hoist and spare couple of hours]. But it didn't say what it was you did, maybe reversed a plate or something - not that important anyway, cos I'm happy with it as it is, so I'll leave it.

Thanks for the links. I'll go have a read now.

The nismo diff you have is basically just an uprated factory GTR type LSD. It should be fairly smooth operating; light throttle it won't lock/clunk and skip. I.e roundabouts car parks etc. They are THE best street LSD in my opinion as they are so smooth and streetable. ;)

You can buy the upgrade clutch packs from Nismo and slap them in the GTR diff. I believe Nengun also sell these.

They are super smooth on light/cruise throttle; give it just that little bit more throttle and it will lock nicely and send a little shudder/skip feel through the car. So really easy to drive around police.

If it clunks/chatter at light throttle change the oil and or push an lsd additive in to it as they are not supposed too.

I remember a while back redline wasn't that crash hot in CLSD's as they clunked. I think I read that here and on a Ford forum. Great for gearbox's not that crash hot for diffs.

The Castrol full synth oil SAF-XA is good and already has the LSD friction modifier in it.

I believe the Redline doesn't have the friction modifier in it and requires redlines additive for the operation to be smooth.

So possibly just add some of redlines friction modifier. Or head down to ford and see if they still stock the ford additive. :)

Just don't add too much; slowly increase the dose. :rofl:

Thanks Cubes, I'll get it hot and change the oil, probably due anyway. I guess Bumblebee was right as well.

But, it did it from when I brought it, so the oil in it from japan was no good either? And it doesn't chatter too much, but you can feel it.

As I said, I'm happy with it, it locks up and drives great when needed. It also helps in a strange way when you power on through corners etc, makes the car feel very predictable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 馃
    • Any difference in induction noise?
    • I think you know exactly who I mean.
    • If I got a dollar for every flipped commuter missile I've driven past I'd have two dollars   Some people get into wild adventures on the road and I doubt it's gender or ethnicity specific. I'm just glad I don't usually drive during peak times.
    • Just got the car back and gave it a good run back home Power wise, whilst it only made a extra 5 killerwasps up top at 7200 rpm, it made more power everywhere from 2500 rpm and kept pulling much harder all the way, to the point of me relearning when to shift so I don't hit the 7200 limiter, with the old intake it seemed to take alot more time to rev out, and, throttle response is also much improved  As I didn't want to remove the bumper every time I serviced the air filter (basically every aftermarket and fabricated CAI has the filter behind the bumper) it currently has a hektic exposed pod in the engine bay sucking in hot air, this will be rectified shortly after some some of my CAD (cardboard assisted design) for a alloy heat shield feed by the OEM intake tube behind the bumper, this will cop some wrinkle black paint, as well as the intake pipe for that totally OEM look... The only fly in the ointment was that the OEM "strut" brace doesn't fit over the rear runner of the new intake with the 2.5 engine is in the engine bay, as the 2.5 raises the engine up by 20mm, it's not a war stopper, and I didn't notice any difference without it in some twisties, but....... MX5 Mania is bringing in some GWR "fancy pants" braces that apparently do fit, if it bolts up I'll grab it, it is also stiffer than the OEM one, which is a bonus All in all I'm happy with the outcome      Fancy pants "strut" brace that gives the required clearance      This is where the clearance issue was, the GWR extends out past this
  • Create New...