Jump to content
SAU Community

Recommended Posts

When I got my R33, it came with a heap of std bits and peices [which I sold off].

One of the boxes was for a Nismo Selective LSD Part No. 38420-RS200 [i kept the box].

1. What I want to know, is this a 1.5 or 2 way diff centre? [What I read on the www was some Nismo units could be either depending on how you set them up].

2. Is it a mechanical diff?

3. How tough is it?

All I know is that it hasn't broken yet, it loads up both wheels every time [corners and acceleration], it clunks and skips in corners, and when you have it on the hoist and spin the back wheels, they both rotate in the same direction.

If anyone can info me up or give me a link I'd appreciate it. I basically want to know what I have.

Link to comment
https://www.sau.com.au/forums/topic/189181-nismo-selective-lsd-diff/
Share on other sites

Could only find 2 references to this part # 38420-RS200 and also 38420-RS201 (in japanese) , mentions it is a selective model, no mention of 1.5 or 2, looks like they were available in both.

Also have a read of this

http://classiczcars.com/forums/showthread.php?t=8305

http://www.poweraxel.com/nismo/news/news2000/n000040.html

Looks like it is an old short lived model, perhaps a Nissan dealer could look up the part # or someone with an old Nismo catalogue.

Edited by chook

Yeah, what I found was that you could do something to it and make it a 1.5 or a 2. From what I understand, you could do this any time you wanted [as long as you have a hoist and spare couple of hours]. But it didn't say what it was you did, maybe reversed a plate or something - not that important anyway, cos I'm happy with it as it is, so I'll leave it.

Thanks for the links. I'll go have a read now.

The nismo diff you have is basically just an uprated factory GTR type LSD. It should be fairly smooth operating; light throttle it won't lock/clunk and skip. I.e roundabouts car parks etc. They are THE best street LSD in my opinion as they are so smooth and streetable. ;)

You can buy the upgrade clutch packs from Nismo and slap them in the GTR diff. I believe Nengun also sell these.

They are super smooth on light/cruise throttle; give it just that little bit more throttle and it will lock nicely and send a little shudder/skip feel through the car. So really easy to drive around police.

If it clunks/chatter at light throttle change the oil and or push an lsd additive in to it as they are not supposed too.

I remember a while back redline wasn't that crash hot in CLSD's as they clunked. I think I read that here and on a Ford forum. Great for gearbox's not that crash hot for diffs.

The Castrol full synth oil SAF-XA is good and already has the LSD friction modifier in it.

I believe the Redline doesn't have the friction modifier in it and requires redlines additive for the operation to be smooth.

So possibly just add some of redlines friction modifier. Or head down to ford and see if they still stock the ford additive. :)

Just don't add too much; slowly increase the dose. :rofl:

Thanks Cubes, I'll get it hot and change the oil, probably due anyway. I guess Bumblebee was right as well.

But, it did it from when I brought it, so the oil in it from japan was no good either? And it doesn't chatter too much, but you can feel it.

As I said, I'm happy with it, it locks up and drives great when needed. It also helps in a strange way when you power on through corners etc, makes the car feel very predictable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If your current chain of thought is, I'll go somewhere like pick and payless (or equivalent) and causally remove the bit of roof with your BYO grinder then casually weld that into your car... oof. It might sound easy but you will 100% end up with a warped roof. You say you'd prefer some ugly fab work, but I don't know if your prepared for how ugly this will be lol.  I've seen professional welders do similar but easier repairs and still end up with warped panels.  It is reasonable to assume that from your current skill level, you won't be able to do this cut and paste job while keeping flat panels.  Ok, but we are here to learn. This might be the go... jump on car sales, sort by price, buy the cheapest thing with rego and drive it home. This is your new practice vehicle. If you're thinking of doing the cut and paste job, try it on this car. Cut out the panel (hey it's a perfect fit) weld in the panel. See what you think of the results.  Next thing you could try, practice removing the entire roof in one piece by drilling out all the spot welds etc. Have a crack and welding the roof back on.   
    • I've never welded but I own a welder and I've always wanted to learn. In fact I had already looked at a 1 day welding course in Sydney.  I'd prefer some ugly metal fab than anything weak.  I'm challenging myself a lot with this car. For so many years I've just paid other people to do things and I've always been keen to learn and get better.
    • Ok, thats a good starting point.  So before we start.... do you mind if the car say isn't a strong as it was before? My first thought is go excavating for rust. You'll be left with a gaping hole, that will be filled with fiberglass. You could make it look factory pretty easily but yeah, if you never crash it will never be an issue right? Before we look at other options, how confident are you welding? 
    • Oh this is my 1998 E39 5 series. It's worth more to me than financial value. It's a project car for me to love and work on without fear of f**king up something that has lots of value or that I need to keep running.
    • I'm super realistic here. I love the car and want to keep it but I know it's days of perfect condition are well and truly over. I just want a fix that won't come back. 
×
×
  • Create New...