Jump to content
SAU Community

Recommended Posts

Steering racks on the early VL Walkinshaw Commodores. They got rubbed out of the results for that.

Although if you were big at JRA I would be interested to hear your comment on the inflatable fuel bladder story that appeared in the current edition of motorsport news (Not the online one, the one at the news stand).

Also were the Group A 3.5 L Rovers actually any good?

Oh and how the 87 VL that Walkinshaw built compared to Larry's example.

And, and, and.....

I worked at JRA, so I don't know anything about Walkinshaw's other cars, so let's stick to that. If you check the Bathurst results you will find that both cars ran shorter distances between pit stops on their tanks than the competion. Which if they were running oversized tanks would not have been the case. If you have the 1985 video, then please check the length of the pit stops, you will find that the fuel refilling is very similar timing to the other cars. Which would not be the case if the tanks were of larger capacity, hence taking longer to fill. The cars did have a 6/7 litre reserve, a warning light came on on the dash when they fuel level got that low, the driver them switched to the reserve, I can't remember what the switching method was, if I ever knew it. I never saw any more than the legal amount of fuel put in the cars from Wednesday to Sunday. The refueling rig was calibrated and they used scales to measure the fuel put in at every pit stop, my maths is good enough to do the sums on the SG of the fuel used.

The Rovers were good cars, nicely prepared, very well balanced, with great handling and brakes. They just lacked capacity, torque really, which at Bathurst is primary. We did a press day at Oran Park and Percy whipped in a few laps at close to lap record pace. The long climb up the mountain really hurt them, but on a handling circuit they were rapid.

Cheers

Gary

  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I worked at JRA, so I don't know anything about Walkinshaw's other cars, so let's stick to that. If you check the Bathurst results you will find that both cars ran shorter distances between pit stops on their tanks than the competion. Which if they were running oversized tanks would not have been the case. If you have the 1985 video, then please check the length of the pit stops, you will find that the fuel refilling is very similar timing to the other cars. Which would not be the case if the tanks were of larger capacity, hence taking longer to fill. The cars did have a 6/7 litre reserve, a warning light came on on the dash when they fuel level got that low, the driver them switched to the reserve, I can't remember what the switching method was, if I ever knew it. I never saw any more than the legal amount of fuel put in the cars from Wednesday to Sunday. The refueling rig was calibrated and they used scales to measure the fuel put in at every pit stop, my maths is good enough to do the sums on the SG of the fuel used.

The Rovers were good cars, nicely prepared, very well balanced, with great handling and brakes. They just lacked capacity, torque really, which at Bathurst is primary. We did a press day at Oran Park and Percy whipped in a few laps at close to lap record pace. The long climb up the mountain really hurt them, but on a handling circuit they were rapid.

Cheers

Gary

What ever happened to the pink rover?

Edited by Jetwreck
I worked at JRA, so I don't know anything about Walkinshaw's other cars, so let's stick to that. If you check the Bathurst results you will find that both cars ran shorter distances between pit stops on their tanks than the competion. Which if they were running oversized tanks would not have been the case. If you have the 1985 video, then please check the length of the pit stops, you will find that the fuel refilling is very similar timing to the other cars. Which would not be the case if the tanks were of larger capacity, hence taking longer to fill. The cars did have a 6/7 litre reserve, a warning light came on on the dash when they fuel level got that low, the driver them switched to the reserve, I can't remember what the switching method was, if I ever knew it. I never saw any more than the legal amount of fuel put in the cars from Wednesday to Sunday. The refueling rig was calibrated and they used scales to measure the fuel put in at every pit stop, my maths is good enough to do the sums on the SG of the fuel used.

The Rovers were good cars, nicely prepared, very well balanced, with great handling and brakes. They just lacked capacity, torque really, which at Bathurst is primary. We did a press day at Oran Park and Percy whipped in a few laps at close to lap record pace. The long climb up the mountain really hurt them, but on a handling circuit they were rapid.

Cheers

Gary

I'll have a look at the video. From memory most teams were still hoiking fuel churns at that stage?

Oh and what really claimed the lead car. Never believed the horseshit about it ingesting headlight glass...

What the Slako/Leeds(?) hot pink number????

Damn...I did an edit...you got to it before I hit update. I think thats it....pretty sure it was white or red before that...Alf Barbagallo.

post-37023-1201757159.jpg

Edited by Jetwreck
I'll have a look at the video. From memory most teams were still hoiking fuel churns at that stage?

From memory 1984 (Rovers) was churns and 1985 (Jags) was an overhead rig, no maybe we didn't use overhead rigs until the BMW's. Too many Bathursts ago, 1,000's and 12 Hour races to remember, maybe time I got the video out again myself. When they were used, the churns were filled from 44's, which were on scales to record their usage. My pit job was crunching numbers, TWR had their own technicians, no Aussies got to touch the cars much at all.

Oh and what really claimed the lead car. Never believed the horseshit about it ingesting headlight glass...

The #1car was Percy and Walkinshaw, finished 3rd

The #3 Car was Goss and Hahne, finished 1st

The #2 car was Soper and Allem, it swallowed the glass.

The foam air filters were directly behind the headlights, one on each side, so it is possible that the broken headlight (reflector) punctured the filter and got sucked in. There were pieces of glass and reflector that fell on the pit garage flooor under the car when it came back. The car went back to the UK untouched, I never saw it with the bonnet open, so I don't know the real story if it was any different. We got a couple of drivers drunk during the celebrations, as you do, but we couldn't get anything contrary out of them. I have seen Gossy a number times over the years and he sticks to the corporate line, maybe that's all he knows as well.

Cheers

Gary

We got a couple of drivers drunk during the celebrations, as you do, but we couldn't get anything contrary out of them. I have seen Gossy a number times over the years and he sticks to the corporate line, maybe that's all he knows as well.

You had to get Gossy pissed to get him to talk? :P How did you ever get him to shut up?

He's alright. Deserved his Bathurst wins no end.

Awww, all this talk of Rover SD1's is making me all nostalgic!

My old man had a special order black 5 speed back in '84/85 that he had Asquith & Johnston stroke and cam. Me being a lil' 9 year old thought dad's car was just the best thing ever, and looking back, it was a good car, probably less issues with that car than any either he or I have ever owned!

Few years back I seriously toyed with building a quick one, but realised that on my budget it meant turfing most of the Rover stuff and fitting Holden gear, so I dropped the plan, built a 32 gtr instead. :P

End sobby-eyed rant gents, my apologies.

Thanks mate!!!! >_<

Great pics on this thread, great discussion.

I also picked up the new mag with the GIO GT-R on the cover. It's great seeing these cars back out on the track to enjoy all over again. I enjoyed the article too (error on engine capacity notwithstanding). However, it seems (quite understandably but unfortunately) that Jim Richards' podium outburst is the one point journalists seem to fixate on. Not the fact that that the race was run in possibly the most atrocious conditions to hit the Mountain on race day; that the world lost a champion in Denny Hulme; that it was essentially the last true Group A Bathurst.... All of these are landmark, but the overriding story seems to be Jim's deserved reply to a bunch of knuckle dragging oxygen thieves. It's a shame the race isn't remembered for more than that.....

Awww, all this talk of Rover SD1's is making me all nostalgic!

My old man had a special order black 5 speed back in '84/85 that he had Asquith & Johnston stroke and cam. Me being a lil' 9 year old thought dad's car was just the best thing ever, and looking back, it was a good car, probably less issues with that car than any either he or I have ever owned!

Few years back I seriously toyed with building a quick one, but realised that on my budget it meant turfing most of the Rover stuff and fitting Holden gear, so I dropped the plan, built a 32 gtr instead. :D

End sobby-eyed rant gents, my apologies.

You would enjoy this one then. It was a red manual with 16 x 8 Simmons gold 3 piece wheels and a 5 litre with the twin throttle bodies off the Group A Vittesse. The 5 litre was the all alloy P76 block, with a forged crank, rods and pistons from the Formula 5000 engine run that was built for the Ansett Elfin (later Anset Charger). It made ~375 hp at the wheels on the Town & Country dyno at Hornsby. I drove it from Warwick to Ipswich and it hardly got below 200 kph all the way. Nice car that one, I didn't like giving it up. :D

Cheers

Gary

lol...I totally agree with all of your statement accept one. I don't have any problem with any Groups A....I do however have major issue's with the V8 Supercars though.....yawn...boring!!

Hey tell me one thing if you know on the B & H Sierra's. In 87 & 88 they were right hand drive. Then in 89 & 90 they were left hand drive. Does this mean that the 87 & 88 cars were built locally and the 89 & 90 car's were from the German Group A series?

OK I dug out an old Bathurst year book & the following were the circumstances:

1. In 1987 There were no B & H Sierras- Frank Gardner ran the JPS M3's that year. The following year (1988) Brock ran the BMW's after his bust up with Holden.

2. They took two Sierras to Bathurst in 1988. Only one ran in the race - winning it as it happens. The left hand drive car sat in the garage and wasn't used in the race. The right hand drive car was the race car. It was the same one that ran the ATCC in white for Longhurst.

3. The two 88 cars were not German. The annual desribes the race winner as "A Don Smith shell fitted out with a kit of components from Andy Rouse" The car was built in Sydney before being shipped North. It was rebuilt before that years Sandown 500.

4. Some bloke called Campbell Little did the engines.

5. Frank Gardner's name was mud in Europe at Ford because his name went on the joint protest that rubbed out the Texaco cars in 1987. So Tomas Mezera was used as an intermediary to buy alot of the parts they needed.

6. I wouldn't expect that latter cars were anything other than locally built.

Someone was asking about TV cameras... These are the Grice/Percy ETCC/BTCC R31, but theres some nice clear frontal pics of the camera setup which was in use over there - possibly similar to here.

WinPercy_1988_Donny_GTS-R_2.jpg

WinPercy_1988_Donny_GTS-R.jpg

Edited by floody
Someone was asking about TV cameras... These are the Grice/Percy ETCC/BTCC R31, but theres some nice clear frontal pics of the camera setup which was in use over there - possibly similar to here.

WinPercy_1988_Donny_GTS-R_2.jpg

WinPercy_1988_Donny_GTS-R.jpg

That was me. Thanks so much for the pictures. I thought the Aussie racecams may have bene larger cameras, but in the absence of any evidence to that, this is fantastic. Thanks!!!!

Also, that was a Nismo Japan car so the cage woudl most likely have been different to the GMS cars? Still good find.

Oh absolutely, most likely different; but possibly there wouldn't have been a massive variance in camera tech then, plus perhaps as now there was an FIA spec for the housing etc...So its probably a reasonable illustrative example.

the R32 must have been a revelation when it was released in 1989.

it pisses me off when people compare the earlier GTR's to more modern performance cars without realising how revolutionary they must have been at the time of their release.

The GT-R completely wiped the floor with it's competitors when released, and for less money too- i.e 964 model Porsche 911, Ferrari 348, Lotus Esprit.

History repeats.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...