Jump to content
SAU Community

D1 And The Monaro

jake33

By jake33,
in General Automotive Discussion

 Share

Recommended Posts

jake33 Experienced

jake33

Posted
  • Author
Posted

Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

GT-R32 Grand Master

GT-R32

Posted
Posted
Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

I guess what sometimes puts people off is not necessarily the car, but the hype that surrounds it. The Holden bandwagon, if you get what I mean.

Same goes for some people's opinion of Skylines.

Rotaries.

4 cylinders.

Etc.

PM-R33 Grand Master

PM-R33

Posted
Posted
Yeah it has done quiet well. Especially the engines. some DA drivers are now using the LS1 and 2.

Although maybe one of the many reasons they are is because it will appeal to the Australian audience more

One of the main reasons they remove RB's, 2JZ's etc is because LS1's are a lot lighter. Alloy block compared to a iron block.

Like the DLS R34 drift car, took out the RB25 Neo, chucked in the LS1, saved 50kg!!! Slapped some twin turbo's on it and you got a hell of a power to weight ratio over the stock engine setup.

1400r Veteran

1400r

Posted
Posted (edited)

lol right never seen one perform better in anything other than commo

Japanese cars with original Japanese motor always out perform the Japanese cars with ls1's etc fitted

kudas S13 with ls1 gets close but Im still not sold on it

Edited by 1400r
1400r Veteran

1400r

Posted
Posted (edited)

are you kidding have you seen it ?

power and torque do not make a drift car

speed,balance and driver skill do

ever seen a d1 ae86?

heres a link to a vid with D1 r34 with rb26 t04z watch it and try tell me that the GT Autosound car has the same balance at the moment

Edited by 1400r
VB- Veteran

VB-

Posted
Posted (edited)

what do you mean by 'balance' exactly? if you mean overall performance, the GT autosound car might need a few tweaks, but they are things that can be ironed out. an RB26 with a to4z would be nice but i cant see it being comparable to a TT LS1. more power, more toque, probly a more 'driveable' car on the track if that makes sense. not to mention the bonus of reliabilty.... :P

Edited by VB-
1400r Veteran

1400r

Posted
Posted

Once they ironed out the problems I'll compare again

until then LS1 being a better engine than those factory fitted is unproven regardless of extra power, reliability etc if it doesnt drift well what does it

matter if it makes more power than a rb or is more reliable

(Im including all rb's as basically being the same balance split wise front to rear although a 26 would weigh more than a 25 if it still had the standard twins)

by balance I mean the whole car working in unison not just a car that makes big power so must be sick yo

in a well balanced drift car the drivers can through the car in much harder and get back on the power much sooner than those with poor balance

skylines are well know for mid drift midcorner understeer Im yet to see how a Ls1 which "weighs less" than a rb has helped at all with this

you still see alittle in the Kakimoto 34 above and its been competing for awhile so all the bugs should be ironed out of it

from all that Ive seen of the Gt Autosound car(and Ive seen a fair bit) it's a corner exit smoke machine

Simon-S14 Grand Master

Simon-S14

Posted
Posted

1400R hits the nail on the head! The GT autosound car isnt a good set up atm as the driver doesnt have anywhere NEAR the skill required to use all of the power to its full potential.. all ive seen from that thing is straight line smoke ups and corner exits.. its lame. Then theres the reliability issues!! Its had a few issues thats for sure.

my RB has had none :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...