Jump to content
SAU Community

Recommended Posts

alright, yesterday i was driving, my car temperature went up to HOT ... right up there. Therefore I stopped and saw a little steam comin out from the engine bay, on the left where the water is. I waited and then opened my radiator valve, and it was totally dry. I didnt have any coolant on me so i just put in some hot water. My car cooled down then i eventually drove to the coast. Did about 600km's soo far, and i checked today, open the radiator valve and it was dry again! TOTALLY DRY! However car hasnt overheated, because i havent driven it since. I thought it was a leak, however there was no water on the ground. What is happenin, please help

bryanlee38

Link to comment
https://www.sau.com.au/forums/topic/19035-keep-overheating-arh-help/
Share on other sites

sort of tune? - newbie (i dont getcha). Car's was dyno tuned by previous owner. I've had the car for a month soo far. I've filled up my car 6 times soo far. I've used ULtime and Optimax mainly, however i did use Mobil Premium unleaded once when i was desperate as i was on very very low fuel.

running stock boost. only mods r bov, pod, TT, 3 inch cat back, THATS it. nothing big. the radiator isnt leaking, no drips on the floor. THe water/coolant is meant to keep filtering back and forth Correct? ANy chance its just evaporating? I've only done 500km's and i have to top up. It has overheated once, but after the 500km's I check and the below the valve cap was DRY. but car hasnt overheated, I've refilled it with water. But will get coolant asap.

car hard to start?

Check the entire engine over for any sign of leakage whilst you run the engine from cold till warm. At this time check that the fan is working.

If you don't see anything then check your oil for signs of milky-ness.

When cool start the engine and run with the cap off.As it warms look for bubbles and signs of fuel contamination.

Take out the plugs and check condition for signs of water, (whiteness)

the car is a little hard to start, but I'm 99% sure its the battery. I'm gettin a new one on thursday. I've checked (well look at the floor) and there's no leakage onto the floor, can it leak onto anywhere else? the fan is working fine for sure. I checked the dipstickm, looks normal, however i did get my oil change yesterday, put in castrol magnotec

WHAT do u mean run with cap off - the radiator cap? What should it look like. currently where u r meant to pour the coolant in, i just have water in there. lastly, when u say take plugs out - what plugs

sorry. I'm new to this. only had the car for a month, slowly learning.

Check your oil for water.. Does it look sorta cloudy at all? That could prove that ur headgasket is gone..

Or perhaps ur head is cracked, or your hoses leak very slowly under pressure (ie engine hot). There are many possibilites...

If the coolant definitely isn't leaking out of the radiator, pump, hoses, etc (ie not leaking onto the ground through the engine bay) then it's going into your engine, simple as that. But check all the above again, as has been said it could be a leak that only happens under pressure.

I had a similar problem on my Commodore because it had a leak around the rear water jacket gaskets. Fortunately this meant it was a fairly slow leak (lost maybe 1 litre per month) and it was going straight into the rear pistons rather than the oil and simply burning off immediately as it seeped through.

I don't know if Skylines have a similar potential water jacket gasket problem, but if they don't then it would have to be the head or head gasket.

Whatever the case, it's time to visit a mechanic.

Yepp, could be the water pump.

How many KM's has the car done?

When they are on their way out, the water can seep out of the breather on the underside of the pump.

Usually they only leak when the temps are up and it's got presure behind it.

This mean that when the water leaks out it will evaperate straight away and just turn into mist, so you won't see any water on the ground :P and you'll be scratching your head for ages trying to find where the leak is....

Take it too a radiator place like RatRad etc. They can presure test the hole system and find out if it's the head gasket or water pump etc.

Good luck

J

It sounds to me like the head gasket or a cracked head if the engine is hard to start, turns over a little slowly. Water in the bores means the compression will be significatly raised for cranking.

I might suggest that you don't try to drive the car around until you have sorted the issue ,or risk bent rods or bearing issues which will make the whole deal very expensive.

If your battery is on the way out (as mine is) every morning the radio will have lost its presets and you will find that the power windows will go slower than a wet weekend. A battery that is not holding it's charge etc is VERY obvious so I would be pointing at head issues.

The spark plugs are what I'm reffering to, if you are a newbe then it would be time to have a mechanic look at it alternatively hook up with a local skyline australia forum member or two who is technical and offer a few beers to have a look. I'm sure there are a few guys in your area.

Had the same problem with my mates R32, only had it for a couple days then suddenly started overheating, It was the water pump, was leaking like a tap. You may only have a small leak under high temperature and pressure so maybe you won't notice anything while stationary.

We managed to get a brandnew water pump for $70. So the problem was fairly easily fixed.

I had a funny thing where i started to hear a really loud screeching noise.. I could see a little bit of steam forming on the windscreen. I opened the bonnet had a look around still hearing the screeching and couldn't see anything

It turned out to be a pin hole in the top radiator hose that due to the size you couldn't even see the steam.

if you want to check it at home.... fill it up with distilled water and then run it warm. to check for external leaks (hoses etc) squeeze the radiator hose (it should maintain pressure when the engine is warm). see if you can see any radiator fluid coming from anywhere when/after you do this. i had a pin prick hole in one of the plenum radiator hoses under the inlet (couldn't see it) and lost a lot of coolant that way

other thing is that internal loss of coolant can be caused by various things but it all comes out at the end (exhaust) so see if steam coming out and could be crack in head or gasket problem. also had this prob and was corrosion hole in head

so far I've done 1000km's since that overheating problem, car has been running smooth as. temp is goin strong. Since that 1000km's back and from the gold coast. I've put 300ml's of water in the radiator cooling system. I was thinking of just putting the coolant in and just see how the car goes for now, DO U THINK THAT's WISE? Like I've done 1000km's, if something was to go wrong, it would have (wouldn't it). But like i said it currently has tap water in there, should i just put coolant in and see how it goes ??? I know i should invest in a mechanic .... I think i will actually.

Don't waste your money on the coolant until you're sure the leak is fixed. You can get by with tap water, as long as you don't get caught in a lot of heavy traffic and don't go into the snow or something (for the boiling/freezing aspect).

Water will corrode your engine faster than coolant, but in the very short time you'll be using it until you visit a mechanic the amount of corrosion will be insignificant.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...