Jump to content
SAU Community

Recommended Posts

I like i have been looking at a 180SX and not considered a GTR-ST because i thought they were a lot heavier and would use more fuel. (to me its an issue, i want good economy if i drive easy)

So this guy who is selling a GTR-ST tells me that they can be more fuel efficient than a S14

to anyone out there who has experience with both models could you please give some FB

between a S13 and a gtrst

can you please tell me which was best for

acceleration?

braking?

cornering?

fuel consumption? best and worst IE is either one better or worse than the other?

cause i realise it comes down to a lot of factors, like how moded it is but as a general rule if you di the same mods, or spent the same money ........

Kev

Link to comment
https://www.sau.com.au/forums/topic/191110-are-skylines-more-frugal-than-s14s/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

do you mean GTS-t?

i own an R32, and one of my close friends owns an S13. i drove his car for a week before i got my car.

you can't really pick "the best". it's all down to personal preference. skylines and silvias are both good cars, but i guess it comes down to the engine you like.

acceleration, braking and cornering are minimal between the 2, all depending on mods and setups.

don't expect good fuel economy from either, but the s13 is slightly better on fuel.

being bias and all, i would go for the skyline :P

Edited by dmr

i own a 180sx and from my point of view i think it comes down to what you want in a car, not which is better, to make this kind of decision.

an r32 is a 6 cyl, yes, but its still only a 2L, r33's on the other hand are still only a 2.5L. depending on how you drive them, sr20, rb20 and rb25 will all have similar fuel usage.

the main thing that made me decide is the size of each car. you gotta decide if you want a smaller car (r32 or s13) or if you want to go for the bit bigger car (r33).

I can tell you that my R33 drinks alot more than my old S15. Bigger engine, more weight, of course the skyline will drink more. But it also has a tougher engine/gearbox combo, and has alot more space inside.

Drive them both, then make up your mind.

my 33 is fairly stockish, exhuast front mount...thats it..lol...runs standard boost, i chop s14's with front mount exhuast + more than stock boost,ive also beaten a gtir with a bit done to it, and a few s15's....makes me think what has really been done to my r33...but yea..fuel...if i drive it easy 450km to a tank has been neared...tough engine and box combo its well worth it tho..get a series 2 33 IMO...Good luck deciding tho..

my 33 is fairly stockish, exhuast front mount...thats it..lol...runs standard boost, i chop s14's with front mount exhuast + more than stock boost,ive also beaten a gtir with a bit done to it, and a few s15's....makes me think what has really been done to my r33...but yea..fuel...if i drive it easy 450km to a tank has been neared...tough engine and box combo its well worth it tho..get a series 2 33 IMO...Good luck deciding tho..

I call lies on this one.

especially the GTiR with a bit done to it.

My S14 had 175rwkw with the usual mods of exhaust, intake, boost and FMIC.

an R33 with the same power can't keep up with them.

GTiR specs:

curb weight - 1220kg

accelleration 0-100kmph - 5.9 seconds

accelleration 0-400m - 13.9 seconds

max power output - 227hp @ 6400rpm (or 171.5 kw)

max torque - approx. 290 nm

R33 GTST specs:

Curb Weight - 1390 Kg

Max. Power; kW/HP 187/250 @ 6400 rpm

Max. Torque 294NM @ 4800 rpm

accelleration 0-100kmph - 6.96 seconds

accelleration 0-400m - 14.30 s

so.. you had stock boost, exhaust and fmic..

he had "a bit of work"

how do you figure you beat a car lighter by 170kg and only making 16kw and 4NM less in standard trim.

same mods done to a GTiR would would tear you a new a-hole.

only way youd win is on a roll from like 120kms onwards..

not that this has anything to do with this thread.

as for this thread.

S14 is better than R32 (with RB20det) on power and fuel.

Looks - R32 GTST is a better looking car than an S14 series 1.

interior on the S14 is better than an R32 GTST

S14 series 2 is better than R32 GTST in any comparison.

Formula goes like this.

R33 S2 > S14A > S14 > R32 > R33 S1

here are my ones..

Stolen S14 with no insurance for the lose

92 R32 GTST

thanks for the repies guys.

I know some think its silly to consider economy with performance car, i of course if you out the hammer down you will drink heaps, but i need a car as a daily, fun to drive but with be easy on the wallet if i drive easy!

Hense the question.

One option i have concidered it to do an LPG conversion and then you can have the power and economy. LPG loves high compression and so you vould really boosts it. Just need a decent size boot to fit the tank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...