Jump to content
SAU Community

The R35 Gt-r - Is It Part Of The Skyline Legacy?


Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

for all those people who say it doesnt have a RB26... farrrrrrk. The original GTR never had an RB26, so does that mean the RB26 should never have been used.

Its called development, and its a great thing.

Lets be honest, the RB26 was a good engine, but imagine what can happen now interms or response and torque. Lets be honest, turbo torque is quite useless. Never there where you want it. RB26 showed this quite well. My mate was going through a round about with a R33 GTR and a clean away truck didnt see him. Put the foot down and got stuck in a whole lot of RB26 lag and zero torque. The GTR got creamed lol.

Lets hope the 3.8 responds better!

Edited by Granthem

Yeah, that's true, although only m/seconds - the RB engines have a lot of turbo lag... don't know why... it's powerful etc, but laggy.

Damn, I am still trying to wake up to the fact the the Skyline, V35 is now a granny car... fark me dead will ya...

Yeah, that's true, although only m/seconds - the RB engines have a lot of turbo lag... don't know why... it's powerful etc, but laggy.
uhhhh... turbo lag is caused by the turbo used, not the engine.
its a GTR, not a skyline. the skyline's gone back to being the regular passenger car that it started out being in the 60's.
the GT-R when originally launched in 1989 was never intended for your average 20 year old on P's to be hooning around in. it was the refined sports car for the older, mature 30 to 40 year old japanese family man. The new GTR is targetted at exactly the same market this time too.

I was under the impression the first skylines came out at the end of the 50's, the first GT-Rs came out in the late 60's and stopped in the earlly 70's. As for the 'family man' thing, didnt they also made a 4 door GT-R back in the day?

I personally think the Skyline Legacy Died after the DR30 RSX-C. R31 onwards seem to conventional in my personal opinion. I expect a skyline to be a pig of a car. mind you the next skyline I want to add to the stable is the 32 GT-R cos I have a thing for them too and the fact im not rich and I can only dream of owning something Pre R30 and with a GT-R or GT-ES Badge

for all those people who say it doesnt have a RB26... farrrrrrk. The original GTR never had an RB26, so does that mean the RB26 should never have been used.

Its called development, and its a great thing.

Lets be honest, the RB26 was a good engine, but imagine what can happen now interms or response and torque. Lets be honest, turbo torque is quite useless. Never there where you want it. RB26 showed this quite well. My mate was going through a round about with a R33 GTR and a clean away truck didnt see him. Put the foot down and got stuck in a whole lot of RB26 lag and zero torque. The GTR got creamed lol.

Lets hope the 3.8 responds better!

man there's some misunderstanding about the difference between 'lag' and the boost threshold of an engine

the GT-R engine with standard turbos doesn't have much 'lag' at all- crack the throttle, and almost instantly the boost gauge will swing into positive pressure, even at low revs, showing that the turbos have a very good transient response time. the fact that they need to have some revs on board to make substantial boost and pull hard is no surprise when you combine a smallish capacity with a short stroke design.

i'm sure if he was in 1st gear he would have escaped ;) (or 2nd for a bigger roundabout)

of course the R35 will have every petrol turbo engine Nissan has ever made completely whipped for low end torque- just look at the specs: 1.2 litres more capacity than a 26, 9.0:1 comp ratio, VVT, variable intake runners, and turbos about the same size as those on the old R34 engines anyway (they look to be)

R32 engine ~ 353Nm @ 4400rpm

R35 engine ~ 588Nm from 3200 to 5200rpm. that's what i call a tractable turbo engine :) (now they just need to pinch some VATN turbs from Porsche :()

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...