Jump to content
SAU Community

Recommended Posts

went for a walk through town last night so many skylines around, saw black r33 gtr plates were zilla or some variation, saw black 32 gtr, black 32 gts-t, white 33gts-t. cant remember the plates though.

I was in Bris last night at about 6.30 for work might have been me??? Who knows there are a fair few 32 gts-t's????

saw 60her ?? 4 door R32 GTS ... on ipswich road near stones corner

the chic who owns this car is pretty cool... i forget her name though. She said the car has had quite a bit of work done..i know its a manual, with intercooler and aftermarket turbo and a few other things i can't remember

Spotted a few times a chick driving nice chameleon orange R32 4 door lowered with some dished 17's or 18's getting around the Ipswich/Redbank area.

I saw that last week... chic looks quite cute..

BLK33 at autobarn slacks creek , another black comming out from shell servo logan road mt gravatt, R32 4 door with toyo stickers on the rear quarter panel at tyre power slacks creek .. white R33 series 2 at sunnybank undercover carpark black plates.. CRG33?

I saw that 33 4 door with the drift wing and chrome wheels on it driven by the guy with dreddies on evans rd, rocklea

I saw rhinorebel along waterworks road

I saw OVR440 parked IN A BUS ZONE in the city, naughty lad in his army greens and all

I saw a silver 4 door 32 on the corner of logan rd and nursery rd... even took a photo of it

I saw a silver 33 with NT plates on it (6** **6) uhm somewhere?

And countless others I forget. Easy 10 skylines a day while I'm out and about, dang things are everywhere

Hey Andrew, sorry I missed you. (you in the commodore??) Just finished footy and at 40, the trip home is a blur.....

Dave :crazy:

I saw rhinorebel along waterworks road

And countless others I forget. Easy 10 skylines a day while I'm out and about, dang things are everywhere

Nah bloke, was in the work van actually :P

Couldnt get into a position to give you the finger, err I mean wave, and besides you wouldnt recognise me hanging out of some random van :P

I think he would Andrew ;) He would go "oh, there is Andrew hanging out his random van again..."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...