Jump to content
SAU Community

Recommended Posts

Spotted:

1 White R33, no wing on the rear, (bat ear look), BIG side skirts, CF bonnet, 400R front bar, stocker rims.

Was on the new bridge ~8am, I slowed to wave, go a smile and a big wave back!

Spotted a real nice orange R33 when it pulled up along side me going past browns plains plaza this afternoon.... :)

if your from here mate"nice motor" :(

John, was the number plate MYTH?

if so, its one TUFF 33 :(

Spotted a bunch of SAu'ers at teh Norman Hotel last night, feeding their faces :)

Spotted a real nice orange R33 when it pulled up along side me going past browns plains plaza this afternoon.... :/

if your from here mate"nice motor" :/

Or and i often see a White R32 with the rear spoiler removed at the plaza of a thursday night.. And usually there's a white R32 i see in carol park when i go to work (think its got rays alloys on it) :mad:

so again.."Hello to these guys if there onboard"

Spotted MAX007 a long way from home as I was coming out of the doctor's yesterday afternoon :D

Also saw two white R33s on Old Cleveland Rd, even got a nod and wave from a guy in one with JON*** on the plates :D the other was **CNC, the girl driving looked on her way past but I didn't see if she waved or not. If so, I did wave but it was too late!! lol

Spotted several Skylines of various years and models (some of you I knew) All drove past my broken down car in Moorooka in front of the Nissan dealership (not funny)

My great thanks to Marc (Revhead) Karen (SMR33) and Dan (Elite Racing Developments) for coming to my rescue. 5 hours on the side of the road and I got to drive the car home! You are brilliant Dan, thanks for everything.

ah, bugger dave!

What was wrong with it?

If i'd seen you, i woulda stopped!

There was a R32 GTR that was broken down on the side of the highway one time, i stopped and tried to help out, but his clutch was dead.... so i hung around until the tow truck arrived.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...