Jump to content
SAU Community

Recommended Posts

spotted Einstein. amd Aphid outa and about :)

nice meet you Einstein, and all ya buddys, the 17 year old is awesome :laugh:

yeah it was fun until they found us again =P

let me know how aphid gets on

also spotted ogr34? on the mt cotton back roads at about 12:45 am

did i see n15m0 this morning on beaudesert road heading south?

if so, hawt 4 door

even wifey remarked how good your car looked

Ummm yesterday Thursday morning on beaudesert rd....definately not me..:) But I'll take the compliments anyways :)

HEY GUYS MY NAME IS SIMON I OWN A WHITE R31 GTS WITH A RB20DET in it, im just looking out for any body who has a old r31 if i can get in contact with them interested to see what mods and work you can do to them, i live in maryborough qld and often cruize to hervey bay and the coast. if you see me say hi.

saw a R33 with a black bonnet on lutwyche rd this afternoon, the owner waved at me and i waved back....

also, this morning on brunswick st new farm, there were five cop cars surrounding a S1 R33 GTST, with number plate IGK....looks like they busted the car for carrying drugs or something.....not looking good at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...