Jump to content
SAU Community

Recommended Posts

keep spotting a red/maroon r33, looks like it may be lowered, and has twin mufflers sticking out. anyone here seen it here on the sunshine coast? aparently it has as trick engine.

Hiya! :wave:

Didn't see you sowy :S

i was at the set of lights in my chaser logan and dawson roads.. :) car looks hot in yellow :)

Spotted OOR34 Lyndens beast roaring past my house yesterday arvo

AJA33 black 33 coupe on mt gravatt capalaba road

spotted 53XNU 32 GTR (Mos pride) Next to me newham road

Spotted Phatboi at the Mobile servo on Lytton rd this morning.

I was undercover in the NEW Mud-Mobile!

lol

what ever happened to him...i spotted him too...but i havent seen him on here is yonks.

Spotted "DEALS" nice R34 GTR v-spec

nice avatar.. :P

Spotted JDM43, just before taking the regents park exit off beauy road.

And saw an R33 with the bluey green two tone paint flash me. Not sure if it was for cops up ahead or to say hi. Either way thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...