Jump to content
SAU Community

Recommended Posts

Spotted the spry mobile, down on logan road parked. First time I've seen it since the kit and paint! Looks pretty good.

Also saw a handful of other skylines, cant remember where tho, because I was stupid and was listening to my dads directions so we got lost.

Spotted a maroon R32 coupe which had smashed through the barrier and become wedged between the fence and the guard-rail on the M1 heading south around the Gaza Road On-ramp around 4pm today. Boys in blue were on the case.

Is it anyone's on here? I didn't see a SAU sticker as I drove by.

Oh, and it's safe to assume it's farked.

Hi all.

I drive a white R33 Gts-T normaly up at redcliffe.

cant miss me very near standard car...................(for now though)

just look for an autoshop.net.au sticker on the back window and give me a wave.

see you all around

spotted a blue r33 gtr at lawnton BCF today,

and followed hacker x from the boardman road roundabout, till he turned off into his dtreet ( i was behind the landcruiser behind u, ) :yes:

spotted a blue r33 gtr at lawnton BCF today,

and followed hacker x from the boardman road roundabout, till he turned off into his dtreet ( i was behind the landcruiser behind u, ) :(

Ha, I don't remember it.

I followed a Blue R34 4 door cross the bridge and a bit down hornibrook esp

Spooted Teena going along brisbane rd near retravision in booval, yesterday about half eleven.

Ahhh yeah, i do remember seeing a 4 door 33, but it didn't click to me at the time that it was you... :)

spotted black R32 GTST 4 door in Suva Fiji .. plates were GTST .. and a heap of nissan laurels specially Green drifter plates Turbo in pacific habour fiji ..

hand ful of gey wrx's sadly no 33' 34 or steaga exisits price of a 32 GTST 4 door is 32grand !!!!! with upwards of 120,000 ks from NZ !

Last night spotted a Black R32, plates: "70Y RB"

was followin you a short way down mt lindsay highway and onto compton rd for a bit till you turned off...bit of a lead foot ey? lol

Edited by RusH_

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...