Jump to content
SAU Community

Recommended Posts

spotted Cusak silver V35 on logan road you where at lights near maccers .. i was in blue 35 that beeped at you..

Spotted a stock White v35 with stickers on it driven by heels .. sadly it was a 250gt ....

This morning on Kessels road red V35 standard plates you were turning into Autobarn macgregor .. driven by a P plater ..

Spotted Mr -032 tonight at the hyperdome (Thursday night around 7pm) darkish colour. Then spotted a white r33 s1 heading south past beenleigh, had some stickers on the back and side, cant remember plates, I gave a wave.

Pretty sure I spotted 666DAN going up sugarbag road in caloundra on saturday....I only caught a very quick glimpse, could be wrong.

Spotted a grey series 1 r33 pulling into 7/11 on vulture street as I was pulling out, sorry I cut you off a tad bro :P

Spotted MRR34 at Sunnybank Market Square....drove past me and my mate in front of Kingsfood...

Car stands out like hell with all them sau stickers, freakin hot...hope you saw my 'dulled down' version R34 parked in front of blockbuster....just call me when you wanna swap. :)

Pretty sure I spotted 666DAN going up sugarbag road in caloundra on saturday....I only caught a very quick glimpse, could be wrong.

Spotted a grey series 1 r33 pulling into 7/11 on vulture street as I was pulling out, sorry I cut you off a tad bro :)

Nah wasn't me, the car actually didn't move Friday through Saturday due to my BAC not being under 0.05....I love easter long weekend!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...