Jump to content
SAU Community

Recommended Posts

Found this while browsing some forums this morning

HRT427

Holden Special Vehicles today announced that it would not go ahead with production of the HRT427 “Supercar”.

Fifty firm orders had been placed for the vehicle, with an unexpectedly high proportion to be for road use. HSV’s desire to build the car to the highest level of safety, engineering integrity and excellence to meet the expected asking price of $215,000 was not achievable at the (restricted) 50 vehicle build level.

To achieve a road car level of specification would have required significantly higher investment levels and resultant higher recommended retail price. Further, HSV was not prepared to build more than 50 units as this would seriously degrade the exclusivity of the very exciting 427 model, nor was HSV prepared to lower the specifications from that of the original show car intent, which may have diluted the integrity of the concept.

HSV expressed great disappointment in not bringing the 427 model to market, as the prototype vehicles that were completed had achieved their engineering objectives and vehicle intent. HSV’s General Manager, Chris Payne, confirmed “The unfortunate and disappointing decision was one purely of business case economics that could not be made viable given our price and customer studies.

“The decision is particularly disappointing as the prototypes already demonstrate the engineering prowess of HSV to develop and build high performance supercars that can compete with the best marques in the world” he added.

HSV will be in direct contact with the fifty customers who were scheduled to become owners of the 427.

“We have some other very exciting and interesting concepts coming down the track that will continue to shape HSV’s leadership in the Australian performance car segment” said Chris Payne.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/19256-hrt-427-has-been-canned/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

HSV’s desire to build the car to the highest level of safety, engineering integrity and excellence to meet the expected asking price of $215,000 was not achievable at the (restricted) 50 vehicle build level.
HSV was not prepared to build more than 50 units as this would seriously degrade the exclusivity of the very exciting 427 model, nor was HSV prepared to lower the specifications from that of the original show car intent, which may have diluted the integrity of the concept.

if that makes sense :(

There are going to be fifty wealthy Holden fanatics out there, that are going to be mighty pissed off at GMH I am thinking.

If the idea was to really get the blood stirring amongst the Holden fraternity, they have certainly done that, but not in the way they intended.

I think it is called shooting yourself in the foot. Duh.

They probably figured it was going to be a financial loss right from the start, but worth it from the PR and product exposure point of view. Advertising is horribly expensive any way you go about it.

Probably now, they realize we are entering into another long term worldwide depression, and the car makers are fighting for survival. It is not now a question of how much profit they will make, but how long they can go on re-financing their debts before they go bankrupt for the last time.

In the 1920's there were over two thousand public companies listed in USA that declared their main business activity as "automobiles, or automobile parts manufacture". After the 1929 to 1935 stock-market crash, only THREE out of the two thousand survived. (Ford GM and Chrysler).

Back then the boom technologies were wireless, aviation, and automobiles. Now it is computers, software and the internet, and it is all crashing into a great heap just as it did last time.

In recent times we have seen one-tel, ansett, HIH, and other large companies just cease to exist. There will be many more.

Hahah, this is great. The HRT 427 was HSV's answer to everything. Giving then international Street cred, a porche Eater, Entry into events like the Bathurst 24hr and GTP championship and give Holden fans bragging rights that an HSV could beat most things on the road. This makes HSV look soo bad after talking it up so much, and being every HSV lovers poster boy.

My only wish now is that they now over turn the Bathurst 24hr Decision as I was under the impression it was for production cars, and the HSV was allowed to race because it was going to be making a copy of the race car (the HRT 427) for production, wouldn't this make that result invalid?

Greg.

yup, exactly my thoughts if you ask me! How can they get away with that.. seems like a pretty blatant flaunt of the "production" car class rules if you ask me. Saying it will be produced, and then canning it.

I saw one at the Melbourne Motorshow, and it definitely had enough enhancements to make it seem a little different - but it still looked like a Monaro.

Well guess Holden still doesn't have anything that is quicker out of the factory than you're average gts-t :(

Warpspeed - man you are mr doom and gloom. At worse Holden will eventually just start using overseas drivetrains rather than trying to engineer their own..but holden as an entity making commodores will be around for a long while I'd say.

I think at Bathurst they were in a prototype category so they are ok there, but in GTP Nations Cup they need to be mass produced cars, 50 or so from memory, so seeing the only ones made were race cars they should be made to run the normal road going puss Monaro

They were allowed to do it as the race needed some big names, Holden, 427 Monaro, some recognised drivers all helped the profile of the race.

I think its a shame its not getting built, it would have been cool to see an Aussie limited edition car that had more then just new badges and wheels.

Maybe CSV will have the balls to build a sh1t hot Monaro in the same light as the HRT427.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...