Jump to content
SAU Community

Recommended Posts

I have just bought a R33 series 2.. stock at the moment and was thinking about getting a front mount intercooler and a BOV.. i dont want too much attention on me on the roads by the cops but i do really like the noise.. are they worth gettin and how much are they with installation??

Link to comment
https://www.sau.com.au/forums/topic/192644-are-bovs-worth-gettin/
Share on other sites

the stock bovs are ok but do tend to leak. as many people on here will end up telling you if you are going to get one go for a plumb back bov. its legal. also good if your not after the attention cause they are quite(ish).

all comes down to what brand bov you want but 200 sounds ok for a decent one. if you get one with a mounting kit that matches the 33 flange then they are easy to install. two bolts, the plumb back pipe and a vacuum line.

Cheers for that info...

thats really cheap.. and a legal one would def be the best for me.. is there anyone out there who knows where is the best cheapest place to go around sydney to get one of these installed? anyone got one who went to a good install place/? cheers

Stock BOV's are fine for most mild applications.

Aftermarket BOV's offer no performance gain, just only noise and sometimes backfiring/stalling, so in my eyes a waste of money.

The money can be spent on other things like ECU/Exhaust/IC... things that will benefit performance

If your stock one fails, just reaplce with a GTR one ($70). I had a single GTR BOV and was running 24psi/370rwkw without issue.

Cheers

the only thing i really want is just the noise.. i know that it doesnt give you any performance but for a small ammount of money could just be a bit of fun .. i have always wanted a turbo car and have one now so its just something that i have also wanted,.. but thanks anyway

A pod will give you noise, you'll hear the standard bov through a pod and induction noise. It won't be as loud as a aftermarket bov, but loud enough.

*people look on in awe saying*

"oh noes nots pods, heat vacuumses"........just shield/box it off and bobs your mothers brother.

in all seriousness these guys are right mate. a plumb back/stock bov is fine. when u are pushing bigger power, keep a plumb back if u wish. but wat u want to get is a bov with a larger diameter.

hey i have an idea!... do what you want to do, its your car and you should enjoy it how you want it... if you want i to make fart noises when you get in, make it do that FFS!!!

enjoy it however you want and if you need help with anything i am happy to help out!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...