Jump to content
SAU Community

Recommended Posts

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

dammit! :D

that is still quick with a passenger! :D

ah well, 1.16 is my goal!

you'll get that easy mate, i did 16's in my car with street tyres and all my stock goodness :thumbsup:

i reckon you should aim for anything below 15's.

I'll be in if there is still spots available next week when I can pay for it! REALLY wanna do it since I fly out for WA a couple of days later :P

lol

On a well organised day (as the autosport ones are), you can get all 10 cars out on the track before the first guy out is all the way around.

So you tend to get 6-7 flying laps in, which is plenty for most cars as they tend to overheat something if left out for much longer

Ok,

So who here from SAU is going?

Me

BHDave

Lizzzzzzeh

wraith skyine

anyone else?

Hunny Beau won't be coming, He is down in VIC for a month for work.

I will be down there but won't be driving.

Thats it that i know of. There is usually another silver r33 that shows up.

Nice to see everyone has a proper car description btw :/

You mean Andrew? The Do-Luck GTR?

  • 3 weeks later...



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...